Description
Jerms Fuzz Factory with 2N35 "Spam Can" transistors. This pedal is sensitive to input impedance, therefore passive guitar impedance circuit was added. Signal Chain: Signal -> Buffer -> Guitar Impedance Circuit -> Fuzz -> Record Pedal Settings: Vol: 0.7 - Gate: 0.8 - Comp: 0.7 - Drive: 0.65 - Stab: 0.9 This pedal has long transient, which causes slow envelope drift in signal. This makes NAM difficult to learn the pedal. Therefore, there are two models: Standard model with Butterworth low-pass filter, and a Custom model with longer receptive field. Comparing with the real pedal, the custom model sounds slightly more close to the real one, but it has weird noise following the guitar signal, and also the model is a bit heavier than the standard. The Butterworth is 2nd order low-pass filter with 5Hz cutoff frequency.
Makes and Models
ZVex Fuzz FactoryPreview
Models
Each model captures the gear at specific settings.
ESR: 0.0103
Epochs: 1000
Sweep Signal
Standard
Captured on
ESR: 0.0306
Epochs: 343
Sweep Signal
Custom
Captured on
Comments
License: T3K
Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.
