MXR Classic 108 Fuzz - 11.5dBu Send/Return - TTSV10 Input
Pedal Capture
NAM
outmodedelectronics
2 days ago
Description
These captures are of my MXR Classic 108 Fuzz, as part of my continued attempts to capture fuzzes. Steinberg UR824 Line Out - DIYRE Line2Amp at 11.5dBu MXR Classic 108 Fuzz - Steinberg UR824 In at 11.5dBu My input and output were set at 11.5dBu so I could interface with my amp captures or Helix Native without adjustment. I recommend setting the NAM Output mode to Raw or Calibrated if you use the auto input calibration feature. Settings approximated in clock position in the following order: (V)olume (F)uzz The pedal has a Buffer switch, which is indicated in the file name if used. Cranking the Fuzz control is very noisy. I found more acceptable noise levels with moderate settings. The captures were made with the TTSV10 input file as a recent experiment with Wet-Dry training. These were trained with the Standard Architecture at 1000 Epochs.
Makes and Models
MXR Classic 108 FuzzPreview
Models
Each model captures the gear at specific settings.
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
Standard
License: T3K
Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.
