Description
These captures are of my MXR Timmy. Steinberg UR824 Line Out - DIYRE Line2Amp at 11.5dBu MXR Timmy - Steinberg UR824 In at 11.5dBu My input and output were set at 11.5dBu so I could interface with my amp captures or Helix Native without adjustment. I recommend setting the NAM Output mode to Raw or Calibrated if you use the auto input calibration feature. Settings approximated in clock position in the following order: (V)olume (B)ass (T)reble (G)ain (C)lipping mode switch positions as follows: L - Asymmetrical - moderate saturation C - Symmetrical - light saturation R - Symmetrical - heavy saturation Treble and Bass knobs are reversed in the MXR version compared to the original Timmy. The captures were made with the TTSV10 input file as a recent experiment with Wet-Dry training. These were trained with the Standard Architecture at 1000 Epochs.
Makes and Models
MXR TimmyPreview
Models
Each model captures the gear at specific settings.
ESR: 0.0005
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.0006
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.0004
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.0014
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.0013
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.001
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.0004
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.0004
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.0003
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.0011
Epochs: 1000
Dry/Wet
Standard
Captured on
Comments
License: T3K
Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.
