Bugera6262 amp/LePou Hybrit sim layered. Celestion/Eminence. Analogue/Digital Hybrid live rig. Single Coil Metal tone. First Attempt

Amp + Cab Capture

NAM

the1mad1planter

7 hours ago

Description

Hi mods! I genuinely do not believe im breaking any rules here. This will take some tinkering to get right (as it can be) and i think it'll be worth it for many cats in the community. Even the first attempt made a really good capture for a high gain tone if you put a tube screamer in front of it. The plugins used are all (very old) FREEWARE and the analogue gear is dirt cheap.....this is an (almost) mix and live tone ready HIGH GAIN/METAL chain i use specifically with single coil guitars... ive developed it over the last several years, and every time i buy a more expensive or different pieces of gear i come back to the same rig. This is a good sounding, but largely failed 1st attempt to capture my layered live high gain setup in a single model file. Im leaving it up because it still sounds fantastic especially with a tube screamer even though it fails pretty hard at capturing what my rig actually sounds like. It is very usable. Its lepou Hybrit (still my favorite marshall-esque amp sim like 15 years later) with tse808 in front of it, and a greenback loaded Orange 2x12 impulse a friend made for me over a decade ago in a fully wooden studio live room (usually outputting for a live tone to a peavey hks12 keyboard amplifier sat right next to the bugera 1/4 stack) layered with a landtone compressor barely dialed in, into a bugera 6262 amp packing el34's head running into a seismic audio 2x12 loaded with eminence designed crate glx speakers from the early 2000s. The microphone on the 2x12 cab is an sm57 + at2020 condensor. I layered the two guitar tones together in daw and rendered them as mono and i used a render of the amp sim stem with no chain on it as my DI input. Was hoping to capture a close enough NAM file to my live rig that i can load into an inexpensive and compatible multi fx floor unit of some kind and make my setup for this kind of harmonic bite an easier process, and also make make shift sound guys with crappy makeshift PA's less annoyed with me and my guys lol. Will take multiple attempts but ill share anything that sounds great, nailed or not for whoever feels like playing with it :) Ill add a picture next time im at the jam space i forgot to snap one before i left, was in a hurry and dont wanna make a collage style photo not sure if against rules or not. Added info: All electrolytic caps of small enough values in the bugera have been swapped for same farad value polypropylene cbb22 film caps. Besides that and the El34s its pretty bone stock. The glx crate speakers have been hit hard for over 20 years now, i was the original owner of the crate 2x12 they came in, and it was my first "jamming" amp way back when. Ive tried lots of speakers, but these are still my favorite. I believe back then crate was using rebranded eminence speakers.

Preview

Model
IR
Input

Powered by

Models

Each model captures the gear at specific knob settings.

A2-FullESR: 0.1016

A2-LiteESR: 0.2206

200 Epochs

Dry/Wet

Captured on

Tone3000 - NAM Captures and IRs

Comments

Share your thoughts...
@username to mention • Ctrl+Enter to submit

License: T3K

Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.

Use Your Tones

Load NAM files and IR's from TONE3000 onto a free plugin or compatible pedal.

Plugins

TONE3000 Digital Models

NEW TO TONE3000?

Discover hyper-realistic digital models of iconic gear, including the Fender Twin Reverb, Vox AC30, Marshall JCM 800, and thousands more. Getting started is easy—and free!