Celestion G12-EVH - EVH 5150III 4x12

Description

I made impulse responses of my EVH 5150III 4x12 cabinet loaded with Celestion G12-EVH speakers. I shot all four speakers and have uploaded on-axis IRs in 0.25inch (~0.6cm) increments from 1.00” to 2.5” from the cap. Off-axis IRs were captured in 0.5” increments. I thought that the cap center to 0.75” positions were a little too piercing, but can upload if any wants. A decent starting point would be “G12-EVH LL 5150III 4x12 SM57 1.75in 0.0in CL7603.wav” This cabinet is a Marshall 1960B-style 4x12 cabinet loaded with 16Ohm G12-EVH speakers. I have read that these speakers were relabeled versions of the now-discontinued G12M67 Heritage Greenback. The most obvious pairing would be with an EVH 5150III series head or capture. I think the IRs complement Plexi circuits with big bright caps or JCM800-type amps as well. I've made Full Rig captures with my Mesa Dual Rectifier Multi-Watt and Peavey 6505 on their highest gain channels with this cab for fun. I shot each microphone position through Chameleon Labs 7603 (Neve 1073-inspired) and CAPI VP28 (API-based) microphone preamps for some variety. 24Bit 48kHz - 500ms - MPT Format Naming Convention G12-EVH <speaker position> 5150III 4x12 <mic> <Distance from Center> <Distance Off Grill> <Off Axis Angle, if applicable> <Microphone Preamp> Speaker Positions are LL – lower left, LR – lower right, UL – upper left, UR – upper right Equipment Used: -Shure SM57 -Behringer A800 Power Amp -Chameleon Labs 7603 Microphone Preamp -CAPI VP28 Microphone Preamp -Steinberg UR824 Audio Interface -Voxengo Deconvolver 10sec sine sweeps were used to excite speaker

Makes and Models

Tags