Celestion G12-EVH - EVH 5150III 4x12 Pt 2

I’ve uploaded impulse responses of my EVH 5150III 4x12 cabinet loaded with Celestion G12-EVH speakers. I used the following microphones: -Beyerdynamic M201TG -Beyerdynamic M69TG -Beyerdynamic M88TG -Beyerdynamic M160 2x -Sennheiser E906 -Audix i5 -Audix OM2 -Heil PR20UT -Oktava MK-012 -Monoprice LR100 Ribbon -Sterling ST170 Ribbon -MXL R80 Ribbon I used each microphone on the lower left speaker through a CAPI VP28 (API-based) microphone preamp. The microphones were positioned on-axis and moved in 0.25” increments away from the cap. I mainly focused on the 1” to 2” region from the cap center, unless the results were too muffled. I previously made IRs of this cab using a Shure SM57 on each of the four speaker with two different mic preamps. https://www.tone3000.com/tones/celestion-g12-evh-evh-5150iii-4x12--40738 For the most part, the mics used in this pack are thicker sounding than the SM57. This pack can be used to blend with those SM57 IRs to fatten them up. 24Bit 48kHz - 500ms - MPT Format Naming Convention G12-EVH <speaker position> 5150III 4x12 <mic> <Distance from Center> <Distance Off Grill> <Off Axis Angle, if applicable> <Microphone Preamp> Speaker Positions are LL – lower left, LR – lower right, UL – upper left, UR – upper right Equipment Used: -Various microphones -Behringer A800 Power Amp -CAPI VP28 Microphone Preamp -Steinberg UR824 Audio Interface -Voxengo Deconvolver 10sec sine sweeps were used to excite speaker