Avalon Design Vt747-Sp

Here are some ideas from settings recommended online. Mastering - Comp Aggressive Glue Ratio: 2:5:1 Attack: slow (150 ms) Release: fast (12 ms) Threshold: -17dB Side-chain filter: 80 Hz TSP: on Mastering - Comp More Glue Ratio: 3:1 Attack: slow (200 ms) Release: fast (12 ms) Threshold: -13dB Side-chain filter: off TSP: on Mastering – Comp Subtle Glue Ratio: 1:5:1 Attack: slow (200 ms) Release: fast (12 ms) Threshold: -20dB Side-chain filter: off TSP: on Mastering - GP Enhancer Ratio: 3:1 Attack: slow (200 ms) Release: fast (12 ms) Threshold: -17 dB Side-chain filter: 80 Hz TSP: on Band 1 (15 Hz): +2.5 dB Band 2 (125 Hz): +0.2 dB Band 3 (500 Hz): zero Band 4 (2 kHz): zero Band 5 (5 kHz): +1 dB Band 6 (32 kHz): +3 dB Mastering – EQ Added Fullness Band 1 (15 Hz): +1.5 dB Band 2 (125 Hz): +0.3 dB Band 3 (500 Hz): zero Band 4 (2 kHz): zero Band 5 (5 kHz): zero Band 6 (32 kHz): zero Mastering – EQ Air Air Air Band 1 (15 Hz): zero Band 2 (125 Hz): zero Band 3 (500 Hz): zero Band 4 (2 kHz): zero Band 5 (5 kHz): zero Band 6 (32 kHz): +2.5 dB Mastering – EQ With A Smile Band 1 (15 Hz): +4 dB Band 2 (125 Hz): zero Band 3 (500 Hz): zero Band 4 (2 kHz): zero Band 5 (5 kHz): zero Band 6 (32 kHz): +4 dB other settings +10dB Toggle: On to drive the tubes for saturation and lastly Passive Graphic EQ Settings for adding sheen to already heavy dist/sat. The EQ is ideal for fixing harshness (high-mids) and adding back "polish" (top end). EQ Position: Post-Compressor. 32kHz (Air Band): Boost (+1.5dB to +3dB). 2kHz Band: Cut (Slightly, -0.5dB to -1dB). 15Hz (Sub Shelf): Cut (-1dB to -2dB). 5kHz Band: Cut (Slightly) hope that can help.