Description
These are Standard captures of my Jet City JCA22H head through a Suhr Reactive Load (45 total when done). I modded the amp with a Depth knob. This particular pack is for the Crunch Channel. Settings are noted in the filename in the following order: Crunch Bass Middle Treble Volume Presence Depth Three gain settings, 5 TMB settings, and 3 Depth settings on each channel (Crunch, Overdrive) were captured. I dialed the amp with the Depth at ~4 (11:00) initially, but wanted to catalogue the effect of dialing it down for reference. The Channel Volume was kept low, but I may revisit at higher volumes in the future. Input/output calibration is 11.5dBu and metadata was filled in. Training was set at 1000 Epochs on TONE3000. The reamp box was a DIYRE L2A. The audio interface used was a Steinberg UR824.
Makes and Models
Jet City - JCA22HPreview
Models
Each model captures the gear at specific settings.
ESR: 0.0035
Epochs: 1000
Sweep Signal
Standard
Captured on
ESR: 0.0028
Epochs: 1000
Sweep Signal
Standard
Captured on
ESR: 0.0039
Epochs: 1000
Sweep Signal
Standard
Captured on
ESR: 0.0023
Epochs: 1000
Sweep Signal
Standard
Captured on
ESR: 0.0026
Epochs: 1000
Sweep Signal
Standard
Captured on
ESR: 0.0027
Epochs: 1000
Sweep Signal
Standard
Captured on
ESR: 0.0023
Epochs: 1000
Sweep Signal
Standard
Captured on
ESR: 0.0023
Epochs: 1000
Sweep Signal
Standard
Captured on
ESR: 0.0027
Epochs: 1000
Sweep Signal
Standard
Captured on
ESR: 0.0021
Epochs: 1000
Sweep Signal
Standard
Captured on
Comments
License: T3K
Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.
