Laney Ironheart IRT60 Killswitch Engage Edition

This is the capture of my Laney Ironheart IRT60 as it used to be played by Killswitch Engage live. I used the information of some rig rundown videos on Youtube to dial it in. IMPORTANT: If you really want to recreate their tone, you would need to add a Maxon OD808 in front of this profile. They used it without drive, full level and an unknown amount of Tone. I assume that was set to about 1-2 o'clock. Speakers should be Celestion Vintage30's. They used the Lead channel exclusively. For clean tones they had another Amp with them which was miced up behind the stage. Later they used the Tony Iommi Edition of this Amp, presumably because of flaws with the gain structure of the Ironheart. This collection contains Captures including and excluding the Power Amp. This was made by using a DI Box in the FX Loop of the AMP and an St.Rock React:IR Load Box. Updates ======= 2025.05.15: Re-Learned the model, phase was inverted which might lead to Aliasing. 2025.06.13: Added Version of Boosted Amp using EHX East River Drive (cheap TubeScreamer copy) with aforementioned settings. 2026.04.10: Added re-captures with new naming schema including amp settings. Should sound much better and closer to the original due to an issue I now know how to workaround with the React:IR. Naming Schema ============= Reamping Related ------------------------- PWR - PowerAmp PRE - PreAmp OD - OD Boosted EQ (-5 to 5 | p = pulled pot) ------------------------------------ B - Bass M - Mid T - Treble Overall Settings --------------------- G - Gain (0 to 10) + Clean Boost (0 to 10) D - Dynamics (%) TN - Tone (-5 to 5)