MXR Classic 108 Fuzz

These captures are of my MXR Classic 108 Fuzz, as part of my continued attempts to capture fuzzes. 5/26/26 Update - Retrained with new hardware chain and lower Pedal Volume setting. RME UCX II Line Out - United Studio Technologies Replay Box at 11.5dBu MXR Classic 108 Fuzz - RME UCX II In at 11.5dBu (11.7dBu + 0.2dB digital makeup gain) My input and output were configured for 11.5dBu with input calibration metadata entered during training. I recommend setting the NAM Output mode to Raw or Calibrated if you use the auto input calibration feature. Settings approximated from 0-10 in the following order: (V)olume (F)uzz The pedal has a Buffer switch, which is indicated in the file name if used. Cranking the Fuzz control is very noisy. I found more acceptable noise levels with moderate settings. The captures were made with the TTSV10 input file as a recent experiment with Wet-Dry training. These were trained with the Standard Architecture at 1000 Epochs.