Salvation Audio UNNAMED (Fortin Meshuggah)

If you like my work & want to support it, you can do so here: https://ko-fi.com/2dornam 🙏 The Salvation Audio UNNAMED is a boutique preamp recreation of the revered "Fortin Meshuggah" for the Egnater / Randall MTS / Synergy platforms. A collection of quality, calibrated profiles (Standard architecture & xSTD architecture) at several of combinations to capture some of the range of tones this preamp is capable of. Use the new "Calibration" feature in the NAM plugin to get the most out of these profiles: https://www.neuralampmodeler.com/post/neuralampmodelerplugin-v0-7-12-is-released Reamp chain details: ---------------------------- • RME Fireface UCX II -> SignalArt reamp -> Synergy SYN1 (with preamp) -> RME Fireface UCX II • SEND level: 22.85 dBu • RETURN level: 13.25 dBu Additional details: ----------------------- A few clarifications on the naming convention: • Hi = the Input switch was flipped to the "High" position • Lo = the Input switch was flipped to the "Low" position • Up = the "Pull Gain" knob was in the UP position (no clipping diodes) • Down = the "Pull Gain" knbo was in the DOWN position (clipping diodes) • [PRE] = profile of just the preamp section. You need to load / use a poweramp sim/profile + IR/cab after the preamp profiles or route them into a real tube poweramp + cab