!!! IMPORTANT: CAPTURES ARE CALIBRATED FOR +18.1 dBu !!!
!!! USE THE NAM PLAYER AUTOMATIC CALIBRATION FOR CORRECT GAIN !!!
!!! COMPLEX CAPTURES ARE STILL IN TRAINING, ONLY STD/XREV CAPTURES ARE AVAILABLE FOR NOW. ONCE TRAINING IS FINISHED IN ABOUT TWO TO THREE MONTHS, YOU WILL RECEIVE THE COMPLEX CAPTURES AS WELL !!!
!!! ONLY THE FULL AMP CAPTURES WILL BE TRAINED WITH THE COMPLEX ARCHITECTURE !!!
This is only a teaser pack. If you want to get all 447 captures or if you simply want to support my work and future NAM endeavors, please consider buying this pack at:
https://slammincaptures.bigcartel.com/product/sold-100-nam-capture-pack
This capture pack is based on a limited edition Soldano SLO 100 6L6 amplifier with a depth control and a very transparent fx loop.
It's one of my biggest capture packs to date as it has 447 unique captures in total. I split this capture pack into pre- and poweramp captures, of which there are 152 unique captures, and full amp captures, with 295 unique captures.
Contained within the full amp captures are also captures with an overdrives and EQs before the amp.
To dial in the tones, I've used a superstrat with a JB in bridge position, an EMG85/SA/SA loaded superstrat and a Gibson Les Paul Standard with Burstbucker Pro pickups.
My capture packs are made with the utmost attention to detail and very high quality outboard gear (Neumann MT48 audio interface, Vovox cables, Suhr/St. Rock/UA OX reactive loads, Lehle P-Split III reamp box, serviced amps etc.).
The main selling points of my capture packs are:
- Very low aliasing due to a much longer training signal
- Very high quality captures with extra accuracy in the case of complex captures
- All captures are calibrated, no guesswork involved
There are also three types of captures in this set:
- Standard denoted with an "S" suffix
- ReverseXStandard denoted with an "XR" suffix (more accurate, similar CPU hit as Standard)
- Complex denoted with a "C" suffix (highest accuracy, highest CPU hit)
If your computer can handle it, go for the complex captures, otherwise XR is a reasonable alternative to the standard architecture.
Regarding the nomenclature of the captures: Each capture starts with the channel designation (O = Overdrive, N = Normal Crunch, C = Normal Clean), followed by a preamp gain description (LG = Low Gain, MG = Medium Gain, HG = High Gain), then follows an EQ description and finally it ends with the master volume, presence and depth control settings.
Lower gain captures are also low in volume, due to their dynamic nature, don't be afraid to turn up the output volume to compensate for it.
Signal Chain: Neumann MT48 Line Output -> Lehle P-Split III Reamp Box -> Soldano SLO 100 -> Suhr Reactive Load -> Neumann MT48 Line Input
Signal Chain Calibration: +18.1 dBu (Calibration Metadata Included)
*** IMPORTANT CALIBRATION INFORMATION ***
If you're using the newest NAM player VST, just enable the automatic gain calibration and enter your max input gain number into the little "cablirate input" window. if you want to do it manually, follow this quick guide:
- Find your audio interface's max input gain for your Hi-Z input in the manual or online
- If your max input gain number is lower than +18.1, then decrease the input gain by the difference between your max input gain and +18.1.
- If your max input gain number is higher than +18.1, then increase the input gain by the difference between your max input gain and +18.1.
Hope you enjoy this capture pack! If you have any questions or experience any problems, feel free to contact me!
Upon payment, you will receive a download link within 48 hours, usually much sooner.
By purchasing this NAM capture pack, you agree to the EULA. No refunds.
