TONE3000

Strymon Deco v1 (2014) – Tape Saturation, 10-Step Saturation Sweep

Pedal Capture

NAM

alexanderkeur

1h

Description

The Tape Saturation section of my Strymon Deco (v1), captured at 10 Saturation settings that cover the knob's full working range. Doubletracker bypassed, Volume at max for every capture. Each model is named after its Saturation knob position (clock face: 7:00 = min, 5:00 = max). SIGNAL CHAIN Scarlett 2i2 3rd Gen line out L → Deco input (mono) → Deco output → 2i2 input 1 (INST, gain at minimum). No reamp box needed: the Deco has a 1 MΩ buffered input and a 100 Ω output. T3K sweep v3, played sample-accurate (no dropouts, blip-aligned to the sample). CALIBRATED Send +6.1 dBu (sweep peaks at +6 dBu at the pedal, inside its +8 dBu max input), return +12.5 dBu. With calibration on in the TONE3000 plugin, these hit your signal like the real pedal. THE MODELS 7:00 – nearly clean, +5 dB, slight high cut (identical to 8:00) 8:30 – still clean, +7 dB 9:00 – saturation starts: soft compression on hard pick attacks 10:00 – light tape grit 11:00 – warm overdrive, noticeably darker 12:00 – classic Deco sweet spot: compresses from moderate picking 1:00 – thick and saturated, +16 dB 2:00 – heavy tape compression, even soft playing saturates 3:00 – dense, dark, saturated almost all the time 4:00 – maximum (4:00 and 5:00 measure identical) Saturation also darkens the top end as you turn it up (about −6 dB at 8 kHz at minimum, −22 dB at max), like tape losing highs when driven. VOLUME KNOB Measured to be a pure clean gain after the saturation (identical distortion and EQ at every Volume setting), so it isn't captured separately. Relative to max: 3:00 −1.7 dB, 12:00 −9.7 dB, 9:00 −23.7 dB, min −26 dB. Turn down your output level to taste. USE IT In front of an amp as a transparent drive or compressor (low settings), as a thick tape overdrive (12:00 and up), or after an amp sim and before the cab for extra "tape" glue.

Makes and Models

Strymon Deco

Preview

NAM CaptureTone on
Mayer - GuitarNone

NAM Models

Each model captures the gear at specific knob settings.

A2-FullESR: 0.0001

A2-LiteESR: 0.0003

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0014

A2-LiteESR: 0.0038

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0007

A2-LiteESR: 0.0042

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0

A2-LiteESR: 0.0001

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0003

A2-LiteESR: 0.0008

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0023

A2-LiteESR: 0.0091

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0004

A2-LiteESR: 0.0028

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0073

A2-LiteESR: 0.0326

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0042

A2-LiteESR: 0.0149

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0067

A2-LiteESR: 0.0287

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

Comments

Share your thoughts...
@username to mention • Ctrl+Enter to submit

License: T3K

Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.

Works with TONE3000

Browse and play TONE3000 tones directly in these plugins, pedals and amps.

Pedals and amps

TONE3000 Digital Models

NEW TO TONE3000?

Discover hyper-realistic digital models of iconic gear, including the Fender Twin Reverb, Vox AC30, Marshall JCM 800, and thousands more. Getting started is easy—and free!