TC Electronic MojoMojo Overdrive 2010

TC Electronic MojoMojo Overdrive - Full Tone Pack (NAM Capture) Welcome to my definitive Tone Pack for TC Electronic MojoMojo Overdrive, famous for its tube-like response, huge dynamic headroom, This pedal behaves more like a boutique amplifier channel than a standard stompbox. This collection includes 8 distinct neural models mapping the entire spectrum of this versatile analog circuit, from clean transparent boosts to high-gain liquid distortion. The 8 Captures are divided into three categories: 1. Gain Stacking & Boost Optimized to work in tandem with other pedals or to push the front end of a tube amplifier, adding warmth or focusing the midrange. - Clean Transparent Boost (Gain Stacking & Boost): Adds analog warmth without altering the frequency response. - Mid-Focused Lead TS-Style (Gain Stacking & Boost): Tight low end and focused mids to cut through the mix. - Treble Booster (Gain Stacking & Boost): Restores clarity to darker humbucker pickups. 2. Amp-in-a-Box These profiles turn the MojoMojo into a standalone preamp channel, emulating the compression and crunch of classic tube amplifiers. - Bluesy Dynamic Breakup (Amp-in-a-Box): Highly touch-sensitive, responds beautifully to the guitar's volume knob. - Texas Blues Crunch (Amp-in-a-Box): Full-bodied overdrive with an emphasis on the low-mids. - Classic British Rock (Amp-in-a-Box): High-output crunch that simulates a vintage amp head pushed to saturation. 3. Signature & Estremi (Signature & Extreme Tones) High-gain presets pushed to the absolute limits of the circuit, featuring setups inspired by iconic artists and heavily saturated textures. - Paul Gilbert Signature Setup (Signature & Extreme): Fast tracking and balanced EQ tailored for alternate picking. - Liquid Solo Max Gain (Signature & Extreme): Maximized drive for endless sustain and fluid legato playing. Signal Chain & Capture Process: Guitar DI / Sweep: 24-bit / 48kHz Mono Audio Interface: AXE I/O One (using the dedicated front-panel 'Amp Out' reamp circuit) Power Supply: Isolated 9V DC pro power supply to ensure the lowest noise floor possible. AI Training: Processed on Tone3000 Cloud with Advanced Training (400 Epochs) and Best Fit enabled for the lowest possible ESR (Error-to-Signal Ratio). How to use: These models are captured as a standalone pedal. For the best experience, load your favorite model inside the official TONE3000 Plugin BEFORE a clean or slightly crunchy guitar amplifier simulation/IR. Technical Explanation of Knob Parameter Mapping Using Clock Positions The parameter values for the knobs in this model are represented using a clock-face reference system based on the traditional clock layout: 12 is at the top, 3 is on the right, 6 is at the bottom, and 9 is on the left. However, the numerical values assigned to the knobs do not correspond directly to the standard clock hours. Instead, they represent specific angular positions of the potentiometer (pot) along its physical rotation path, which may be non-linear and asymmetrical. For example, the value 11 corresponds approximately to the 11 o’clock position on the clock face, which is slightly left and above the top center (12 o’clock). In this model, this position is interpreted as near the midpoint of the pot’s rotation range, not near the maximum. This custom mapping allows for a more accurate representation of the actual physical position of the knobs, reflecting the true behavior of the potentiometers rather than a simple linear scale. By using this clock-based notation, users can intuitively understand and replicate knob settings, ensuring precise tone adjustments and consistent results across different setups. If you like these models, please leave a review or a comment below! Enjoy your tone!