Tech 21 Sansamp XB Driver

The SansAmp XB Driver is a 100% analog dual-amp, bi-amp, DI toolbox with 15 knobs and 3 switches. The Clean and Drive channels are full-frequency, independent channels that can be used individually or blended together via the Mix footswitch. In Mix mode, you can engage the crossover switch to activate the sweepable LPF & HPF filters. The model tone and names are from the samples in the manual. I did not dial the sample tones myself. The web preview of tone3000 is pretty good, just add Ampeg 8x10 IR for a better sample of this capture. I used an SSL2+ MKII to send the sweep signal and record the pedal. Then I used a Darkglass Anagram to bring down the line level output to pedal level output using its Send port because I don't have a reamp box for now. I do have a multimeter so this is calibrated. I use this pedal direct to foh, home mixer, and interface using its balanced XLR output. For this capture, I used the 1/4" unbalanced low Z output. If I can afford a reamp box, I'll redo the capture but through the balanced out.