TONE3000

2016 Friedman BE100 (Amp head only, 4x12 Mesa as load)

Amp Head Capture

NAM

21
mikesedani's avatar

mikesedani

1mo

Description

2016 Friedman BE100 head DI captures. Made with the speaker out connected to a 1993 Mesa OS Std 4x12 to properly load down the amp. No load box was used. The sweep was sent out of the DAW via an RME ADI-8 QS DA converter, into a Little Labs 'Pepper' Reamp box, then sent directly to the amp input jack. The 2nd amp speaker out was sent to an Avalon U5 DI (amp in jack) and sent line level directly to my RME ADI-8 QS AD converter. All Mogami cabling was used. Use your favorite Impulse responses or download my free pack that is linked. Captures include the BE channel, BE channel with Sat switch on, and HBE channel. All other mod switches are off. Pic shows amp settings during capture process unless otherwise noted. My guitar was hitting around -10dbfs on the input and it sounds just like my amp to me. This is my first NAM capture. If people like it I will do more. It's an amazing technology. EDIT- I was asked so added 5 more captures with the mids set to 4 instead of 5... a couple with a Maxon Apex 808 to boost the amp. (Gain 0, Tone middle, Volume 3 o'clock). Have fun!!

Makes and Models

Friedman BE100 HBE

Preview

NAM CaptureTone on
Mayer - GuitarMesa 412 OS

NAM Models

Each model captures the gear at specific knob settings.

21 Comments

Share your thoughts...
@username to mention • Ctrl+Enter to submit
  (edited)
Also if you allow me to make a small suggestion, from the three you posted, the HBE 100 sounds best because, I believe, activating HBE disable some of the low end. The BE and Be sat on would benefit from a small decrease in bass and or resonance. The biggest chalange in NAM And other captures is how to make the sound in the room sound as good as when it is captured and sound in the DAW. That is why I suggested previously not to bother with capturing a mic'ed cab. The NAM + Cab will introduce more issues and will not sound as accurate as if you would capture a DI and later add your own IR separate. I believe David Friedman and others when adding more gain like the HBE mode, they disable some of the low end on in the Valve 1 and Valve 2, so it gets tighter and more "precise". In the room this might not make much difference but when capturing it makes a huge difference
2
quality is very very good could you please try to make exactly like this but with mids at 4 and 1 or 2 DI with a boost in front (drive 0, tone middle, level almost all way up) ? Also could you explain to us more about the RME ADI-8 QS DA ? how to connect this RME ADI-8 to interface? is it through usb or another connection?
2
  (edited)
great one! perfect gain balance, cant wait for more
2

License: T3K

Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.

Works with TONE3000

Browse and play TONE3000 tones directly in these plugins, pedals and amps.

Pedals and amps

TONE3000 Digital Models

NEW TO TONE3000?

Discover hyper-realistic digital models of iconic gear, including the Fender Twin Reverb, Vox AC30, Marshall JCM 800, and thousands more. Getting started is easy—and free!