TONE3000

BluGuitar AMP1 Mercury

Amp Head Capture

NAM

dronek's avatar

dronek

53m

Description

The AMP1 is a bit of an oddball. It’s a 100-watt amp head about the size of a tablet, designed by Thomas Blug to sit on a pedalboard or travel in a gig bag. Inside, it’s a mix of solid-state analog circuitry, a tiny “Nanotube” valve and a Class-D power stage, so it isn’t a tube amp in the traditional sense, but it’s built to react like one. That makes it a fun subject for a capture: a whole rack of amp voicings in one box. The Mercury Edition is the revoiced second version, announced at NAMM 2018. The overdrive channels were tightened up, the Classic and Modern channels got more bite in high gain, and the Clean channel gained a warmer “tweed” side and a clearer “modern” side. The overall character leans British, with plenty of crunch and classic rock grit. It’s not the most natural fit for everything, though. The Modern channel can be a bit too dark and slow for very low tunings, so the amp is best suited to classic and mid-gain playing. There are four channels: Clean, plus three overdrive voices, Vintage, Classic and Modern. They share one three-band EQ which is meant to be used more like a post EQ in order to adapt the amp to different cabs. All three EQ controls were kept at noon for the captures but multiple custom control TONE trim pot positions were captured per channel at various gain levels. Interesting fact: the amp can be operated without a cab load and could therefore be captured using a DI box with attenuation of the line signal. However, having a load connected is supposed to slightly improve the tone so I used a Suhr Reactive Load connected to the 8 Ohm output of the amp. Tone hint: try cranking the input gain on the low volume (V6) captures of the CLEAN channel for a more defined breakup compared to the V10 captures at neutral input gain. This is because the volume control on the clean channel has an internal bright cap and this is also the case for the gain of the overdrive channels. Therefore it's worth experimenting with higher input levels on moderate gain captures. **Controls** Channel selector: Clean (CLN), Vintage (VIN), Classic (CLA) or Modern (MOD) Clean Volume (V): Sets the level of the Clean channel. Gain (G): Sets the amount of gain on the overdrive channels. Master: Sets the overall volume of the amp and also adds a kind of power-stage saturation. Was set to to taste at approx 6.5. Bass, Mid and Treble: A shared three-band tone stack for all channels. Reverb: Sets the amount of the built-in spring reverb. Was kept off. Boost: Adds a level boost, with an adjustable amount and character. Wasn't captured, assuming, you can easily replicate it by a clean boost + EQ. Custom Controls (trimpots on the side) (T with L for all the way to the left, M for middle position and R for all the way to the right): Tone filters that adjust the character of each channel, except the Vintage channel. I recommend watching John's review of this amp on YouTube (linked below) and also Thomas Blug's channel with his incredibly extensive series of "Acadamy of Tone" videos (also linked below).

Makes and Models

Bluguitar Amp1 Mercury

Tags

Preview

NAM CaptureTone on
Mayer - GuitarMesa 412 OS

NAM Models

Each model captures the gear at specific knob settings.

cal.

cal.

cal.

cal.

cal.

cal.

cal.

cal.

cal.

cal.

Comments

Share your thoughts...
@username to mention • Ctrl+Enter to submit

License: T3K

Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.

Works with TONE3000

Browse and play TONE3000 tones directly in these plugins, pedals and amps.

Pedals and amps

TONE3000 Digital Models

NEW TO TONE3000?

Discover hyper-realistic digital models of iconic gear, including the Fender Twin Reverb, Vox AC30, Marshall JCM 800, and thousands more. Getting started is easy—and free!