Bogner 212C 2x12 with Electro-Voice EVM12L IR Collection
Impulse Response
IR
dahmanmusic
1 year ago
Description
IRs made from my Bogner 2x12 oversize closed-back cabinet made of multi-ply birch. It is loaded with two 8ohm Electro-Voice EVM12L Black Label Zakk Wylde speakers wired in parallel. Five different close mics were used to capture all two speakers (numbered 1 and 2); R121, SM57, MD421, i5, and SM7B, mic'd in the following positions: -Cap=center of the cap -Cap Edge=edge of the cap where it meets the cone -Cone=midpoint of the cone halfway between cap and cone edge -Cone Edge=edge of the cone right next to the baffle Each speaker was also captured using two SM57s in Fredman configuration. Two positions were captured, one with the on-axis mic aimed at the cap, the other with the on-axis mic aimed at the cap edge. An example pairing would be: "Fredman 1 On-Axis - Cap," and "Fredman 1 Off-Axis - Cap." Speaker Numbers: 1-left 2-right Two distant mics were also used; C414, and M160, both mic'd at the center of the cabinet at distances of 12" and 24" Mics were powered by Universal Audio 2-610 mic pres, passed through HCL Varis Tube Vari-Mu compressor for color, and into RME Fireface converters. Captured using 10 second sine wave sweep @24bit/48kHz February 2024 Nathaniel@DahmanMusic.com www.DahmanMusic.com
Makes and Models
Bogner 2x12Tags
Preview
Impulse Responses
Each impulse response is a snapshot that captures different mic placements, speakers, room positions, reverb settings etc.
License: T3K
Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.
