Custom 2x10 with Celestion Vintage 10 IR Collection

Impulse Response

IR

dahmanmusic's avatar

dahmanmusic

1 year ago

Description

IRs made from my custom-built, small-size 2x10 closed-back cabinet made of lightweight 3/4" kiln dried pine. It is loaded with two 8ohm Celestion Vintage 10 speakers mounted diagonally and wired in parallel. Please note, these are the original 20+year old VINTAGE 10 speakers, NOT the modern "V10" speakers. Four different close mics were used to capture both the upper and lower speakers; R121, SM57, MD421, and i5, mic'd in the following positions: -Cap=center of the cap -Cap Edge=edge of the cap where it meets the cone -Cone=midpoint of the cone halfway between cap and cone edge -Cone Edge=edge of the cone right next to the baffle Two distant mics were also used; C414, and M160, both mic'd at the center of the cabinet at distances of 12" and 24" Mics were powered by Universal Audio 2-610 mic pres, passed through HCL Varis Tube Vari-Mu compressor for color, and into RME Fireface converters. Captured using 10 second sine wave sweep @24bit/48kHz December 2023 Nathaniel@DahmanMusic.com www.DahmanMusic.com

Makes and Models

Custom 2x10 with V10

Preview

0:00 / 0:00
IR
Input
Model

Impulse Responses

Each impulse response is a snapshot that captures different mic placements, speakers, room positions, reverb settings etc.

License: T3K

Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.

Use Your Tones

Load NAM files and IR's from TONE3000 onto a free plugin or compatible pedal.