DiezBuzz Stereo

This is more of an experiment, combination of buzzaround and tube amp. Profiles are designed to be played together in Tone 3K Stereo and panned fully left and right. The tracks must be stereo, mono to stereo, or your DAW must treat all tracks as stereo. A true mono track will not sound very good. Buzzaround was used as a preamp into a power amp. Amp and Pedal post FX chain: SSL eq, tape saturation, and sound of room. Tightens up pretty well by backing off volume or placing a boost in front. High dB files are pretty hot, -6db on the Tone 3K output knob is a good start. The output must be reduced to sound right. Reduce the T3K output until it tightens up then add eq to taste. I balanced L&R as well as I could; but, it still may need a little L/R balancing. Flipping the phase on one side moves things around for a different sort of tone and feel. However, the profiles will need realigned and balanced after inverting phase. Oversampling does help. A mono boost in Gateway from an 808, Klon, etc works well. A slight reverb or room plugin after T3K helps glue the sides together.