TONE3000

DV Mark Multiamp FG-inspired foundation

Experimental Capture

NAM

cmacjam

1h

Description

------------------------ Guitar -> input trim / light compressor -> OD/boost (Crunch/Lead only) -> NAM amp-head capture -> matching FG IR -> chorus / modulation -> short stereo delay -> plate or dark hall reverb Do NOT capture chorus, long delay, or reverb into the NAM amp model. NAM works best for the nonlinear amp/drive portion; ambience remains more controllable after it. INPUT ----- Set interface instrument input so hard picking stays clean. Aim for approximately -12 to -8 dBFS peaks. FG CLEAN -------- Amp type: high-headroom American/neutral clean or very clean boutique model Gain: 2.5/10 Bass: 4.0/10 Mid: 6.2/10 Treble: 5.2/10 Presence: 4.5/10 Master/model level: unity IR: FG_Clean_Wide_Tight_IR.wav Compressor: Ratio 2.5:1 Attack 25 ms Release 100 ms Gain reduction 2-3 dB on peaks Drunken Chorus: Rate L = 0.23 Hz Rate R = 0.31 Hz Depth = 22-28% Pre-delay = 8-12 ms Mix = 16-20% Stereo phase offset = ~90 degrees Optional detune = L -5 cents / R +7 cents Short ambience delay: L 78 ms / R 112 ms Feedback 8-12% Mix 8-11% High cut 5.5-6.5 kHz FG FUSION CRUNCH ---------------- Amp type: hot British / articulate fusion crunch Gain: 4.8/10 Bass: 3.5/10 Mid: 6.8/10 Treble: 5.0/10 Presence: 4.2/10 IR: FG_Fusion_Crunch_Tight_IR.wav Pre-boost: Drive 0.8-1.5/10 Tone 4.5-5.0/10 Level +4 to +6 dB Keep bass reduced before distortion. Post EQ starting points: HPF 75 Hz, 18 dB/oct -1.5 dB @ 250 Hz, Q 0.8 +1.5 dB @ 850 Hz, Q 0.8 +1.8 dB @ 1.45 kHz, Q 0.9 LPF 8.5 kHz, 12 dB/oct FG FLUID LEAD ------------- Amp type: singing high-gain lead with moderate compression and clear pick attack Gain: 5.8-6.4/10 Bass: 3.2/10 Mid: 7.2/10 Treble: 4.7/10 Presence: 3.8-4.2/10 IR: FG_Fluid_Lead_Fat_IR.wav Pre-boost: Drive 0.5-1.0/10 Tone 4.3/10 Level +5 to +7 dB Post EQ: HPF 80 Hz, 18 dB/oct -1.2 dB @ 280 Hz, Q 0.9 +1.8 dB @ 720 Hz, Q 0.8 +2.2 dB @ 1.25 kHz, Q 0.9 +1.0 dB @ 2.2 kHz, Q 1.0 -1.5 dB @ 4.8 kHz, Q 1.2 LPF 8.0 kHz, 12 dB/oct Delay: L 285 ms / R 340 ms Feedback 18-22% Mix 12-16% High cut 5.5 kHz Reverb: Dark plate or hall Decay 1.6-2.2 s Pre-delay 20-30 ms Mix 8-12% High cut 5.5-6.5 kHz OPTIONAL HARMONIZER ------------------- Place after amp + IR and before delay. For diatonic fusion lines: Voice 1: +3rd in key, 12-18% mix Voice 2: optional +6th, 8-12% mix Keep formant/pitch correction natural and tracking fast.

Preview

Model
IR
Input

Powered by

Models

Each model captures the gear at specific knob settings.

A2-FullESR: 0.0002

A2-LiteESR: 0.0011

200 Epochs

Dry/Wet

Captured on

Tone3000 - NAM Captures and IRs

Comments

Share your thoughts...
@username to mention • Ctrl+Enter to submit

License: T3K

Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.

Works with TONE3000

Browse and play TONE3000 tones directly in these plugins, pedals and amps.

Pedals and amps

TONE3000 Digital Models

NEW TO TONE3000?

Discover hyper-realistic digital models of iconic gear, including the Fender Twin Reverb, Vox AC30, Marshall JCM 800, and thousands more. Getting started is easy—and free!