Fender M-80 (Celine2NAM)

[IMPORTANT] These are new captures that use Céline, a new SPICE-based realtime circuit simulator. This upload supersedes the old one that were made with LiveSPICE, but the latter will remain available for posterity. --- Fender M-80. One of the many underrated amps amongst Fender's line of solid state amps. Nice cleans and great dirty tones. ・Clean and Overdrive channels. The latter has a Contour tone control that does more than a simple mid frequency notch/boost - 0 shapes the sound into a honky mid-forward tone, while max is very scooped. Three separate captures of the OD channel are provided for this reason. [LEGEND] ・CLN - Clean channel ・OD - Overdrive channel ・CTR - Contour [NOTES] ・All the models are captured with 4x oversampling for the highest quality possible. ・All the controls are flat so you can hear the amp as it is with neutral settings. I may add additional captures with "ideal" settings, but that's not a priority for now.. ・Should you wish to push more gain into the captures, use a separate gain utility/plugin and a clipper/waveshaper/limiter with a ceiling of -0.1dB or less before your NAM loader to prevent nuking the models if the input signal gets too hot. === Céline: https://celine-audio.github.io/CelineWebsite/ Céline .celsch schematic files: https://github.com/MARKTHERENCE/Celine-emy-Circuits === There has been some interest for me to have an option for people who'd like to donate for my work, so here's my PayPal link *only* if you feel generous: https://paypal.me/83ennui Making these captures take a lot of time, from researching the schematic diagrams (whether original or reproduced with certain degrees of verification), to cross-referencing from various gear presentations and demos, and several passes of training the captures to determine the adjustments needed with the Celine models/components for the most accurate/ideal simulation possible.