Full Rig - Mesa Boogie Dual Rectifier Multi-Watt Red Modern - 11.5dBu - TTSV10

Description

I hooked up my Mesa Boogie Dual Rectifier Multi-Watt head through my Line 6 Spider Valve 4x12 cabinet. I mic'ed the 16 ohm Celestion Vintage 30 and Creamback M65 speakers in that cabinet with a Shure SM57. The Red Channel's Modern Mode was used, with the amp set on the typical Bold and Silicon Diode rectifier setting. Full Rig captures are labeled 'FR'. No IRs needed. A few Amp Only Captures are also included for use with your favorite IRs. These captures are labeled 'DI'. Mic positions are as follows: a - 1.25" (~3.2cm) from the cap center a - 1.50" (~3.8cm) from the cap center c - 1.75" (~4.5cm) from the cap center I chose 3 tone settings to capture. Tone settings are in the following order: (G)ain - (Ma)ster (P)resence (T)reble (M)iddle (B)ass I approximated knob settings from 0-10. Signal Chain: Steinberg UR824 Line Out - DIYRE Line2Amp at 11.5dBu - Mesa Boogie Dual Rectifier Multi-Watt - Suhr Reactive Load Thru - Line 6 Spider Valve 4x12 - Vintage 30/Creamback M65 - Shure SM57 - Chameleon Labs 7603 Preamp - Steinberg UR824 Line In The Suhr Reactive Load's unbalanced output was connected to my interface's instrument input. I took DI captures at the same time as I recorded through the cabinet. The use of the Suhr's Thru output bypassed its internal load to use the cabinet's load. All captures trained at 1000 Epochs using the TTSV10 input file, from The Tone Scientist, that is floating around. https://shop.thetonescientist.com/ Both Standard and xSTD architectures are provided. The Standard files should load in NAM hardware loaders. Input calibration metadata for 11.5dBu was filled in during training.

Makes and Models

Tags