Marshall JCM900 2100 (LiveSPICE2NAM)

Marshall JCM900 2100. Was looking for the Dual Reverb model but I just picked the first JCM900 model that was listed from Dr.Tube's schematic webpage, lmao. Ended up liking this a lot because of the range of distortion characteristics that you can dial in. It can go from really tight to fuzzy with the Gain Sensitivity control, so I had to capture different settings with it. Everything else is still at noon, though. ・Multiple captures of the preamp's Gain Sensitivity control from 0-10 to capture the full range of the amp's distortion characteristics. ・Preamp and poweramp sections are also provided separately. [LEGEND] ・FULL - Preamp + poweramp ・PRE - Preamp section ・PWR - Poweramp section ・GS[0-10] - Gain Sensitivity knob [NOTES] ・All the models are captured with 8x oversampling and 64 iterations for the highest quality possible. ・All the controls are flat so you can hear the amp as it is with neutral settings. I may add additional captures with "ideal" settings, but that's not a priority for now.. 　。Only exception to this is the Gain Sensitivity knob due to different tonal variations that can't be dialed with the Preamp Volume alone, so 11 different captures are provided. ・Should you wish to push more gain into the captures, use a separate gain utility/plugin and a clipper/waveshaper/limiter with a ceiling of -0.1dB or less before your NAM loader to prevent nuking the models if the input signal gets too hot. === First ever NAM captures with Architecture 2. About time I hopped on the bandwagon. A2 has been a significant improvement from its predecessor. I enjoyed the results so much that I decided to make NAM captures of some of my own LiveSPICE schematic files, primarily for convenience and CPU usage - especially with my music "workstation" being an early 2011 13" MacBook Pro as a Linux machine. More to come... === LiveSPICE: https://livespice.org/ Original LiveSPICE .schx schematic file: https://github.com/MARKTHERENCE/LiveSPICE-MK-Circuits