Maxon OD-9

I figured it wouldn't hurt to provide another TS-style pedal on TONE3000, but at my specific input/output settings intended to work with my other pedal and amp captures. Settings approximated from 0-10 in the following order: (L)evel (T)one (D)rive With the Level cranked and Drive at minimum, I varied the Tone knob from 0-10. These settings are typically used to boost an already distorted amp. I also varied the Tone knob with the Level set at 8 and Drive set at 4. I settled on these settings to use as an overdrive into a clean high headroom Fender Blackface-style amp. RME UCX II Line Out - United Studio Technologies Replay Box at 11.5dBu Maxon OD-9 - RME UCX II In at 11.7dBu I recommend setting the NAM Output mode to Raw or Calibrated if you use the auto input calibration feature. My I/O is at more or less unity gain, so you can experiment stacking overdrives in a realistic way using my other pedal captures. The captures were made with the shortened V11 input file from The Tone Scientist (https://www.tone3000.com/thetonescientist).