TONE3000

Mesa Boogie Badlander Rectifier 100W EL34 (SignalArt reamp)

Amp Head Capture

NAM

221

Comment

2dor's avatar

2dor

2 years ago

Description

If you like my work & want to support it, you can do so here: https://ko-fi.com/2dornam 🙏 Ladies & gentlemen - the Mesa Boogie Badlander Rectifier 100W (EL34) Trained with NAM v0.10.0 using the new methodology Steve published: https://neural-amp-modeler.readthedocs.io/en/latest/tutorials/calibration.html • SEND level: 22.903 dBu (10.82 V) • RETURN level: 13.303 dBu No need to worry about the above values (SEND / RETURN) anymore - just use NAM plugin v0.7.12 (or later) with the "Calibrate Input" feature. Key in your input headroom / maximum input gain inside the "Calibrate Input" textbox and the NAM plugin will do all the math to get profiles to behave as if you were plugging into the real gear itself. Reamp chain details: -------------------- • RME Fireface UCX II -> SignalArt reamp box -> Mesa Badlander 100W -> St.Rock React:IR II -> RME Fireface UCX II Additional details: ------------------- • 111 profiles (full Amp head, Preamp only & Poweramp only) included at various settings • Legendary Tones Mr. Scary Mod included • Mix of my own settings, settings from the Mesa manual as well as from other artists (Mark Morton, Ola), YouTubers (Kyle Bull, Blake Mansfield) and some forum folks (PaisleyWookiee). • A spreadsheet / guide to understanding how each profile was dialed & the source of inspiration: https://mega.nz/file/GkgiVKLA#B9a9PeMYsqag5CqT2-TpaX4O19_dNggcaDQSwee4U8g • AMP (full amp head) & POW (poweramp) profiles are direct; you need to use an IR of your choice • All profiles use the STANDARD architecture - they will run on the Dimehead NAM player • ESR graphs available here (most are below the established "Great" accuracy threshold; the rest are as close as the STANDARD NAM architecture allows it to be): https://mega.nz/folder/voIBkZwY#qe0wLzjOfdWsUbl87ynBKw • All amp settings were reamped twice: through the "Signal Art" as well as the "Lehle P-SPLIT III". • The leading "S-" in the profile name indicates the "Signal Art" reamp box was used. The "Lehle P-SPLIT III" profile pack will use "L-" !!! ATTENTION, NERDS !!! (yes, that's YOU if you've made it this far): ---------------------------------------------------------------------- • Use the [CabMatch] impulse responses I included to adjust the frequency response of the profiles to my Mesa 2x12, Mesa 4x12 or both of them hooked up to the Badlander • You still need a regular speaker IR after these • These IRs cover all power ratings (20W, 50W and 100W) across both BOLD and VARIAC modes • To those familiar with the Fractal units, this is somewhat similar to adjusting the "Speaker Impedance Curve" in the AMP block. I will release the "Lehle P-SPLIT III" reamped versions of all these profiles soon.

Makes and Models

BadlanderMesa Boogie Badlander Rectifier

Tags

1940s1950s1960s1970s1980s1990s2000s2010s2020sambientbluesbreakupbrightcleancountrycrunchdarkdistortiondjentdryexperimentalfatfenderishfuzzygrungeguitarhigh-gainindiejazzmetalmid-forwardnampoppoweramp-onlypreamp-onlypunkrocksaturatedscoopedtightvalvevoxish

Linked Tones

Mesa Boogie Badlander Rectifier 100W EL34 (SignalArt reamp) — CabMatch

Mesa Boogie Badlander Rectifier 100W EL34 (SignalArt reamp) — CabMatch

Impulse Response

IR

2dor's avatar

2dor

Mesa Boogie Badlander Rectifier 100W EL34 (Lehle P-SPLIT III reamp)

Mesa Boogie Badlander Rectifier 100W EL34 (Lehle P-SPLIT III reamp)

Amp Head Capture

NAM

2dor's avatar

2dor

[96KHz] Mesa Boogie Badlander Rectifier 100W EL34 (SignalArt reamp)

[96KHz] Mesa Boogie Badlander Rectifier 100W EL34 (SignalArt reamp)

Amp Head Capture

NAM

2dor's avatar

2dor

ReLoaded: Mesa Boogie Badlander 100W (EL34) community pack — Amp Head

ReLoaded: Mesa Boogie Badlander 100W (EL34) community pack — Amp Head

Amp Head Capture

NAM

2dor's avatar

2dor

Preview

Model
IR
Input

Powered by

Models

Each model captures the gear at specific knob settings.

A2-FullESR: 0.0259

A2-LiteESR: 0.082

500 Epochs

Dry/Wet

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0033

A2-LiteESR: 0.0103

500 Epochs

Convert

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0022

A2-LiteESR: 0.0056

500 Epochs

Convert

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0071

A2-LiteESR: 0.0301

500 Epochs

Convert

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0113

A2-LiteESR: 0.0432

500 Epochs

Convert

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0123

A2-LiteESR: 0.0552

500 Epochs

Convert

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.016

A2-LiteESR: 0.0493

500 Epochs

Convert

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0042

A2-LiteESR: 0.0178

500 Epochs

Convert

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0103

A2-LiteESR: 0.045

500 Epochs

Convert

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0081

A2-LiteESR: 0.0418

500 Epochs

Convert

Captured on

Tone3000 - NAM Captures and IRs

Comments

Share your thoughts...
@username to mention • Ctrl+Enter to submit

License: T3K

Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.

Use Your Tones

Load NAM files and IR's from TONE3000 onto a free plugin or compatible pedal.

Plugins

NAM
Recommended (free)

Pedals

Chaos Audio
Chaos Audio
Anagram
Darkglass Electronics
Dimehead
Dimehead
TONE3000 Digital Models

NEW TO TONE3000?

Discover hyper-realistic digital models of iconic gear, including the Fender Twin Reverb, Vox AC30, Marshall JCM 800, and thousands more. Getting started is easy—and free!

Discover TONE3000