Mesa Boogie Mark V in IIC+ mode (Sequis, OR=High)

Mesa Boogie Mark V amp head captured with preamp + EQ + poweramp, all settings as shown. Focusrite 18i20 3rd gen line output to Radial REAMP box, max output level, no filter, straight in to front of amp. 8Ω speaker output into Sequis Motherload Elemental dummy load box with speaker thru to MESA 1x12" V30 cab, set to High output range with Speaker Volume at 0. FX SEND from Elemental back to Focusrite to capture raw poweramp signal without speaker simulator. Channel 3, IIC+ mode - all settings exactly as shown in the picture. gain at 3 o'clock, master at 11 o'clock, presence at 9 o'clock, treble at 3 o'clock, mid at 7 o'clock, bass at 9 o'clock. Normal (not bright) switch. EQ engaged - all bands exactly as shown in the picture. 80Hz boosted halfway between middle and top lines, 240Hz bottom of fader at bottom line, 750Hz all the way down, 2200Hz top of fader just below middle line, 6600Hz bottom of fader just above middle line. Master volume at 12 o'clock. Full power mode (not variac). 90W power selection on channel 3.