1980 Marshall JMP 2204 (EL34) "MultiLoad" community pack

🅰️2️⃣ ready ! It's my pleasure to present a 1980 Marshall JMP 2204. With the original Drake transformers, stock circuit, recapped, re-tubed (Mullard XF2 EL34) this thing is full of mojo. If you like my work & want to support me, consider grabbing the ✨full✨ 1980 Marshall JMP 2204 (EL34) "MultiLoad" pack over here: 👉 https://ko-fi.com/2dornam/shop 🙏 ℹ️ “MultiLoad” - what’s this about? The cabinet (or load) a tube amplifier interacts with has a considerable impact on the tone & feel. For this pack, I used 2 iconic cabinets and reamped all settings with each cab. ℹ️ Summary The pack features a 1980 Marshall JMP 2204 amp captured using 2 iconic cabinets loading down the amplifier. ✅ NAM A2 - all profiles trained with A2 from original audio ✅ 2 iconic guitar cabs used as loads (no reactive load): 🟣 Marshall 4x12 1960BV (Marshall G12 Vintage speakers) 🟣 Mesa 2x12 2104 (Marshall T3054 EM4 vented speakers) 🔥Legendary Tones "Mr. Scary" mod profiles included ✅ All profiles calibrated ✅ DI and MIC-ed up flavors for each profile ✅ Custom, extended anti-aliasing signal used for reamping ✅ High-fidelity, low-noise, linear signal chain for reamping ✅ Stompbox / OD profiles included 💥 16 ohm amp into 4 ohm cabinet? 💥 Yeah - I did that too. The amp survived! 🤘 After reamping everything with the Marshall 4x12 1960BV I realized I had the speaker cable coming from the amp into the 4 ohm input of the cabinet. I decided to include these profiles as they have a different feel & sound. Look for the profiles with "Msm4x12" in the title. 💯 The full pack on Ko-Fi includes: • 69 x AMP settings x 2 matched cabinet loads (1 x DI and 5 mic-ed up, full-rig profiles for every knob combination used) • 69 x AMP settings x 1 mismatched cabinet load (1 x DI and 5 mic-ed up, full-rig profiles for every knob combination used) • 10 x OD pedal settings TOTAL: 1,252 profiles ✅ Efficiency Streamlined for users across platforms (Dimehead, Valeton GP-5 etc), AMP profiles offer 6 flavors: • DI = raw poweramp <-> cab signal tapped with a DI box, no Microphone • SM57 = full-rig chain, cab mic-ed with a Shure SM57 on the top-left speaker • SM58 = full-rig chain, cab mic-ed with a Shure SM58 on the top-right speaker • BLEND #1: full-rig chain, cab mic-ed with 2 mics (Shure SM57 & SM58) blended • BLEND #2: full-rig chain, cab mic-ed with 2 mics (Shure SM57 & SM58 @ +4dB) blended • BLEND #3: full-rig chain, cab mic-ed with 2 mics (Shure SM57 @ +4dB & SM58) blended ⚙️ Reamp chain details • RME Fireface UCX II -> Lehle P-SPLIT III -> Marshall JMP 2204 -> St.Rock React:IR II (Marshall 2x12 2104 / Marshall 4x12 1960BV) -> RME Fireface UCX II • SEND level: 18.995 dBu Use the "Calibration" feature (video linked) in the NAM plugin to get the most out of these profiles: https://www.neuralampmodeler.com/post/neuralampmodelerplugin-v0-7-12-is-released 🏷️ Naming convention summary • [AMP] = full head (pre & poweramp) • [OD] = overdrive pedal • Mar4x12 = Marshall 4x12 1960BV cabinet used as load • Msm4x12 = Marshall 4x12 1960BV cabinet with impedance mismatch used as load • Mar2x12 = Marshall 2x12 2104 cabinet used as load • HI = high input on the amp used • HI+ = high input + overdrive pedal • LO = high input on the amp used • Mr. = Legendary Tones Mr. Scary mod used in V2 preamp socket 📒 Spreadsheet with settings & inspiration for all profiles: https://mega.nz/file/yoIRGbDC#vIOhMjFz6gYDBns4XhmB5pdLR2y4NgiXHcH2_DE6YpU