Ceriatone Chupacabra 50W

If you like my work & want to support it, you can do so here: https://ko-fi.com/2dornam 🙏 Chupacabra 50W tube head into a St. Rock React:IR II reactive load. 29 direct profiles covering "clean to mean & some in-between" tones. [POW] = only poweramp profiles (preamp is bypassed) [AMP] = full amp profiles Reamp chain details: • RME Fireface UCX II -> SignalArt reamp box -> Amp -> Loadbox -> RME Fireface UCX II Use the new "Calibration" feature in the NAM plugin to get the most out of these profiles: https://www.neuralampmodeler.com/post/neuralampmodelerplugin-v0-7-12-is-released These are direct profiles so feel free to experiment with cab IRs of your choice. To take it one step further, use my "Match" IRs to match the amp/poweramp frequency response to that of the amp connected directly to my Mesa 4x12 Oversized Straight or my Mesa 2x12 Rectifier cabinets. These 2 IRs were created to match the frequency response of my Chupacabra 50W amp profiles (reamped through the St.Rock React:IR II loadbox) to that of my 2 real cabs: • Mesa Rectifier 4x12 Oversized Straight • Mesa Rectifier 2x12 Standard (not compact) These IRs will get you that extra step closer so that the profiles sound / behave / feel as if they were shot with the real cabs connected to them. These may not suit other amps/profiles even if the same loadbox is used; they are specifically tailored for my Chupacabra 50W profiles.