Darkglass ADAM - BASS - Updated on 18.06.2026

DARKGLASS - ADAM ================= UPDATE, 18.06.2026: ------------------------------ Captured some more settings. these are now for passive bass Engine 2 and 3, each has 4 captures: 1 - Blend at ~80%, no IR, 2 - Blend at 100, no IR, 3 - Blend at 100, with OwnHammer SVT Cut mix IR. 4 - Blend at 100, no EQ, no IR Originals: ------------- These captures made to suit my bass with Darkglass ToneCapsule ToneCapsule settings: - Bass (~80Hz for low end): +2 (of the max 5) if you are lacking low end, you can add a separate track in your DAW, with low pass filter around 250Hz, and use it as a clean low end to blend into the driven signal. - LowMids (~800Hz for growl): +2 (of the max 5), this adds growl. if you don't have a ToneCapsule, then you can add a boost before these captures and boost around at 800Hz by a few dBs - HiMids (~1.5kHz for attack): very slight boost, around +0.5 (of the max 5) Captures: - 2 captures of Engine #2 - Low Gain. With and without an IR: Comp.: #3, at 10 ( of 15 LED dots) Preamp (Engine): #2 Drive: 3 (of 15 LED dots) Character: 11 (of 15 LED dots) Blend: 13 (of 15 LED dots) GEQ: +1, -2, -4, +1, +3, -1 IR: OwnHammer Ampeg 410 SVT Cut Mix - 2 captures of Engine #3 - High Gain. With and without an IR: Comp.: #3, at 10 ( of 15 LED dots) Preamp (Engine): #3 Drive: 9 (of 15 LED dots) Character: 10 (of 15 LED dots) Blend: 13 (of 15 LED dots) GEQ: +1, -2, -4, +1, +2, -1 IR: OwnHammer Ampeg 410 SVT Cut Mix