Dr Z EZG-50 2x12

This is my first capture, and it is of my Dr Z EZG-50 amp head connected to a Dr Z 2x12 Open Back cab with a Celestion V-30 and a Celestion G12H 70th anniversary speakers. The signal chain: Windows 11 PC with Sonar X3 Producer DAW > SPL Crimson Audio Interface > Palmer River Trave re-amp box > Amp > Cab > Shure SM57 & the t.bone RM 700 ribbon mixed approximately 50/50 > SPL Crimson > PC Settings: Pre 10:30, Post 09:00, Treble 12:00, Mid 00:30, Bass: 10:30 I use this clean settings as a pedal platform. Dr Z says: "The EZG-50 has the definitive 6L6 clean sound. Whether you are lusting after the classic “El Mocambo” tone, looking to surf the big waves, or want twang straight out of Bakersfield, the EZG-50 will satisfy the most discriminating blackface tone seeker. This is a sound that has been missing in the Z line up until now. Much time and care was taken in the development of the EZG-50. The seed of the amp came from a new 6L6 output transformer designed for Z Amps by Ken Fischer of Trainwreck Amps. The output transformer has a very unique impedance not used by other American amp makers making it one of the key factors to the EZG-50s sound. NOS Allen Bradley carbon comp resistors are used in all critical tone positions of the EZG-50 circuit. These classic resistors add a warmth and depth to the tone that only they can give. The EZG-50 features a 2-knob, all-tube spring reverb. The Dwell and Mix controls give you full authority over your reverb needs. Anything from a subtle tail on the note to a full-on surf assault is at your command. You also get a full EQ and a Pre and Post master volume, allowing you to achieve tube saturation and overdrive with control over the volume level. Around the back panel you’ll find 16, 8, and 4 ohm speaker outs to accommodate any cabinet. With 50 watts of clean power, 2-knob reverb, and a tube rectifier, the EZG-50 is the blackface head that never was…a’la Dr Z!"