Ibanez Thermion TN120 (LiveSPICE2NAM)

Ibanez Thermion TN120. One of those amps that's a tad bit darker in voicing OOTB than I'd prefer, but it's perfect for smooth clean/distorted tones. Otherwise, it needs a lift with pre/post EQs depending on your taste. ・Vintage Channel - Clean to breakup sounds. Also has a three-way Bright switch. ・Hot Channel - Crunch to high gain sounds. One thing to note is that it has its own Presence control in its preamp circuit instead of the phase inverter/poweramp section. ・Preamp and poweramp sections are also provided separately. [LEGEND] ・FULL - Preamp + poweramp ・PRE - Preamp section ・PWR - Poweramp section ・HI - High input ・LO - Low input ・VNTG - Vintage channel ・HOT - Hot channel ・BR, BR2 - Bright, Brighter [NOTES] ・All the models are captured with 8x oversampling and 64 iterations for the highest quality possible. ・Should you wish to push more gain into the captures, use a separate gain utility/plugin and a clipper/waveshaper/limiter with a ceiling of -0.1dB or less before your NAM loader to prevent nuking the models if the input signal gets too hot. === First ever NAM captures with Architecture 2. About time I hopped on the bandwagon. A2 has been a significant improvement from its predecessor. I enjoyed the results so much that I decided to make NAM captures of some of my own LiveSPICE schematic files, primarily for convenience and CPU usage - especially with my music "workstation" being an early 2011 13" MacBook Pro as a Linux machine. More to come... === LiveSPICE: https://livespice.org/ Original LiveSPICE .schx schematic file: https://github.com/MARKTHERENCE/LiveSPICE-MK-Circuits