Vox UL7120 (Celine2NAM) | Calibrated

[REUPLOAD + WITH CALIBRATION] The old upload was flagged and set to private, because the UL730 and UL7120 are in the same upload, which does not adhere to the recent changes in the Tone Sharing Guidelines. The other reason is that I'm recapturing my schematic files with 16x oversampling, as Céline introduced it in v1.3.0 back in 10/29/2026. Also, as you can infer from the title, all future uploads will be calibrated from now on. More details at the bottom of the description text. --- [IMPORTANT] ・These are new captures that use Céline, a new SPICE-based realtime circuit simulator. ・This upload supersedes the uncalibrated captures and the old LiveSPICE upload, which have been set to private as they are flagged in accordance to the recent Tone Sharing Guidelines. --- Vox UL7120. The highest watts amongst the UL series, going up to 120w. The bass amp version (UL4130) was requested by @ljpstudios around a month ago or so, but I did the guitar amp variant by mistake, so both that and the UL430 will have to be done as well for completeness' sake. A lot of what I've said about the UL730 applies here, although it has less breakup due to the unorthodox design of the power amp section. Quite fatter sounding overall and works great as a pedal platform. ・Normal Channel with Mid-freq Shift switch. ・Vibrato Channel with Mid-freq Shift switch and a Distortion circuit. ・Preamp and poweramp sections are also provided separately. [LEGEND] ・FULL - Preamp + poweramp ・PRE - Preamp section ・PWR - Poweramp section ・NOR - Normal channel ・VIB - Vibrato channel ・DST - Distortion ・BST - Boost [NOTES] ・All the models are captured with 4x oversampling for the highest quality possible. ・All the controls are flat so you can hear the amp as it is with neutral settings. I may add additional captures with "ideal" settings, but that's not a priority for now.. ・Should you wish to push more gain into the captures, use a separate gain utility/plugin and a clipper/waveshaper/limiter with a ceiling of -0.1dB or less before your NAM loader to prevent nuking the models if the input signal gets too hot. [CALIBRATION INFO] ・Send Level is +12dBu, as it is the expected value for the TONE3000 plugin. ・Return Levels 　。(Full Amp) Normal Channel: -17.8 dBu 　。(Full Amp) Normal Channel [Boost]: -17.7 dBu 　。(Full Amp) Vibrato Channel: -3 dBu 　。(Full Amp) Vibrato Channel [Boost]: -2.9 dBu 　。(Full Amp) Vibrato Channel + Distortion: -13.9 dBu 　。(Full Amp) Vibrato Channel + Distortion [Boost]: -13.8 dBu 　。(Preamp) Normal Channel: -21 dBu 　。(Preamp) Normal Channel [Boost]: -20.9 dBu 　。(Preamp) Vibrato Channel: -6.3 dBu 　。(Preamp) Vibrato Channel [Boost]: -6.2 dBu 　。(Preamp) Vibrato Channel + Distortion: -17.1 dBu 　。(Preamp) Vibrato Channel + Distortion [Boost]: -17 dBu 　。Poweramp: +19.7 dBu === Céline: https://celine-audio.github.io/CelineWebsite/ Céline .celsch schematic files: https://github.com/MARKTHERENCE/Celine-emy-Circuits === There has been some interest for me to have an option for people who'd like to donate for my work, so here's my PayPal link *only* if you feel generous: https://paypal.me/83ennui Making these captures take a lot of time, from researching the schematic diagrams (whether original or reproduced with certain degrees of verification), to cross-referencing from various gear presentations and demos, and several passes of training the captures to determine the adjustments needed with the Celine models/components for the most accurate/ideal simulation possible.