Jixing JX-6520

Consider adding an IR; its cab comes loaded with a generic 6-inch 8Ω audio speaker. This tonepack combines real gear and *FREE* software (AmpliTube CS DAW tool). It’s is a “15 Watt” practice guitar amp built around a TDA2030A and RC4550D integrated circuits. TWEAKS: Tone 3.6 - Now monitoring with EarPods. - Return EQ: +15dB treble, -15dB middle, 0dB bass. - Track faders set to -2.9dB wet, -13.0dB dry. Tone 3.3 - Changed the dry blend treble-boost to mid-boost. - Return track EQ set to 0dB treble, -15dB middle, +15dB bass. - Mic sensitivity set to ~60% (from 5%-10% previously). Tone 3 goes back to Tone 1’s foundation while applying some fixes: mid-boost, max fader gain, max output and max volume. I turned off iOS’ compression to avoid Tone 2’s failure. Tonestack-wise I set 0 High, 10 Mid and 10 Low. Mic’s once again set laying flat but pointing towards cone edge (phone body over dust cap). For the return track I applied a mid-scoop EQ and blended the original (treble-boosted) sweep signal as subtly as I could; that should bring back some needed clarity (specially when playing chords) without changing the overall tone noticeably.