Lokajaudio Doom Machine V3 [Hyper Accuracy]

Purchase the original pedal, handmade in CZ, here: https://lokajaudio.com/products/lokajaudio-doom-machine-v3 File name explanation: `5Mag_0Clip_5Amp_5Filt_5Dist_5Oct_1M_1O_1A` = Magnitude @ 50% Clip switch off Amplitude @ 50% Filter @ 50% Distortion @ 50% Octave @ 50% Magnitude switch on Octave switch on Amplitude switch on [C300] = COMPLEX, 300 Epochs, trained with a custom fork of NAM. [RyH300] = REVyHi, 300 Epochs, trained with a custom fork of NAM. [RyS300] = REVySTD, 300 Epochs, trained with a custom fork of NAM. [RxS300] = REVxSTD, 300 Epochs, trained with a custom fork of NAM. [STD300] = STANDARD, 300 Epochs, trained with a custom fork of NAM. Model architectures explained: STANDARD = Baseline, "normal" NAM Architecture, should play nice with most hardware, about 290 kB. REVxSTD = Basically the same requirements as Standard, but sometimes better quality, about 290 kB. REVySTD = Similar to REVxSTD, but possibly better, a bit more demanding, slightly larger file size. REVyHI = Close to COMPLEX in terms of accuracy, about 480 kB. COMPLEX = The absolute highest NAM quality! You may need a more powerful computer, and some hardware will not be able to handle this. I recommend using a less demanding Architecture for tracking, and then using COMPLEX for offline rendering. Size is about 1900 kB. Signal chain: Ableton Live 12.3 Suite ZOOM UAC-232 32-bit float 48 kHz 100% gain ART Dual RDB 100% gain Lokajaudio Der Blend ZOOM UAC-232 32-bit float 48 kHz input level 12 Ableton Live 12.3 Suite Converted to 24-bit integer 48 kHz mono and normalized to -3 dBFS TPL via dBpowerAmp. ZOOM UAC-232 100% output, using a sine wave input at approximately 1.00 kHz measuring just barely under 0 dBFS TPL at the DAW output (double checked with YouLean Loudness Meter 2 Pro) measures 3.518 or 3.559 Volts RMS, which converts to 13.14 dBu or 13.245 dBu, respectively. I list 13 dBu. I used an AstroAI TRMS-6000 multimeter, and triple-checked the measurements. The ZOOM UAC-232 Hi-Z TRS input was set to +12 dBu, and the level measured in the DAW was just under -8 dBFS. I list 4 dBu. Power was provided by a Mosky ISO-10 PSU, which has been proven to not have continuity between the individual output grounds, and which uses a high-impedance LVR to isolate the grounds. Computer specs: ROG Z13 ACRNM i9 13900H 32 GB LPDDR5 Nvidia GTX 4070 Mobile Windows 11 Pro You can use my fork of NAM to make your own "Hyper Accuracy" aka "COMPLEX" architecture NAM profiles, as well as "REVxSTD", "REVyHI", and other Architectures: https://github.com/sskalnik/neural-amp-modeler