Park 1210 Rock Head (LiveSPICE2NAM)

Park 1210 Rock Head. I put this one *far* in my backlogs because the last time I attempted to simulate this amp (which was a full year ago), it wasn't distorting the way I expected it to - this is how I find out that the phase inverters before the power amp section can be used as a gain stage as well in-between. The other reason is that I had a lot of struggles with reading the original schematic so it kind of turned me off every time the thought of wanting to finish this one came to mind. But since I made the Fender Bassman and Vibroverb captures already, I figured there's no excuse now. :P ・Input A - high gain. 　。Due to the cascaded tube gain stages having their own Gain pots, three captures of this input channel are provided; all Gain pots at 5 (noon), and either Gain-A or Gain-B at max. This covers the range of gain available. ・Input B - low gain. ・Preamp and poweramp sections are also provided separately. [LEGEND] ・FULL - Preamp + poweramp ・PRE - Preamp section ・PWR - Poweramp section ・InA - high gain input channel ・InB - low gain input channel ・GainA/B - Gain-A / Gain-B controls [NOTES] ・All the models are captured with 8x oversampling and 64 iterations for the highest quality possible. ・All controls are flat so you can hear the amp as it is with neutral settings. I may add additional captures with "ideal" settings, but that's not a priority for now.. 　。Only exception to this is the Drive channel with the Stack switch engaged. Three captures of it with the Gain controls at 5 (noon), Gain-A control at max, and Gain-B control at max are provided to cover the range of gain available. ・Should you wish to push more gain into the captures, use a separate gain utility/plugin and a clipper/waveshaper/limiter with a ceiling of -0.1dB or less before your NAM loader to prevent nuking the models if the input signal gets too hot. === LiveSPICE: https://livespice.org/ Original LiveSPICE .schx schematic file: https://github.com/MARKTHERENCE/LiveSPICE-MK-Circuits