PRS Archon CLASSIC 50 (6CA7)
Amp Head Capture
NAM
2dor
5 months ago
Description
If you like my work & want to support it, you can do so here: https://ko-fi.com/2dornam 🙏 A collection of quality, calibrated profiles (Standard architecture & xSTD architecture) at a multitude of combinations to capture the range of tones this amp is capable of. The pack includes tones inspired from most YouTube reviews where the sound quality was good & knob positions were visible. Use the new "Calibration" feature in the NAM plugin to get the most out of these profiles: https://www.neuralampmodeler.com/post/neuralampmodelerplugin-v0-7-12-is-released Reamp chain details: ---------------------------- • RME Fireface UCX II -> Lehle P-SPLIT III -> PRS Archon CLASSIC 50 (6CA7) -> St.Rock React:IR II -> RME Fireface UCX II • SEND level: 18.995 dBu • RETURN level: 13.195 dBu Additional details: ----------------------- A few clarifications on the naming convention: • [AMP] = direct profile (IR required) of the amp head • [PRE] = profile of just the preamp section; use a poweramp + IR/cab with it • [POW] = poweramp only profile; use a preamp with it and an IR • ARC50C-LEAD = the amp was using the LEAD channel • ARC50C-CLEAN = the amp was using the CLEAN channel • STD = uses the STANDARD architecture; works on the Dimehead NAM Player • xSTD = uses a custom architecture (Андрей Полевой) from the NAM FB group • A guide to understanding how each profile was dialed & the source of inspiration: https://mega.nz/file/ftpQzADJ#9rEX-oRsSfSezZufd85mejjvEI-zzFwIrZ6xc_KoGG0 !!! ATTENTION, NERDS !!! (yes, that's YOU if you've made it this far): ----------------------------------- You know I like to experiment. I took my efforts of adapting the frequency response of a loadbox to a real cabinet load one step further. Previously, I had supplied an IR which was developed to "tone match" the frequency response of the amp+loadbox to that of the amp+cabinet. While that works alright, it is a static curve. In this pack, I've included 2 NAM profiles which aim to adjust the response to that of a real cab and account for non-linearities: • [FRC] ARC50C ReactiveLoad-to-CabinetLoad #01 • [FRC] ARC50C ReactiveLoad-to-CabinetLoad #02 Use either one of these profiles in series with the [AMP] and [POW] profiles with a "RL" in the title to, essentially, obtain a poweramp response equivalent to that of a Mesa 4x12 Oversized Straight cabinet loading it down. With current limitations on reamping using a real cabinet (living conditions, neighbors etc.), this method can be used to mimic the real cab load behavior with the smallest amount of environmental noise & somewhat replicating in NAM what Fractal Audio Systems offers in their units - the "Speaker Impedance Curve" adjustment
Tags
Preview
Models
Each model captures the gear at specific settings.
ESR: 0.008
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.0055
Epochs: 1000
Dry/Wet
Custom
Captured on
ESR: 0.0103
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.0059
Epochs: 1000
Dry/Wet
Custom
Captured on
ESR: 0.0057
Epochs: 1000
Dry/Wet
Custom
Captured on
ESR: 0.008
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.0061
Epochs: 1000
Dry/Wet
Custom
Captured on
ESR: 0.0086
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.007
Epochs: 1000
Dry/Wet
Standard
Captured on
ESR: 0.0055
Epochs: 1000
Dry/Wet
Custom
Captured on
Comments
License: T3K
Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.Use Your Tones
Load NAM files and IR's from TONE3000 onto a free plugin or compatible pedal.
NEW TO TONE3000?
Discover hyper-realistic digital models of iconic gear, including the Fender Twin Reverb, Vox AC30, Marshall JCM 800, and thousands more. Getting started is easy—and free!