ReLoaded: Mesa Boogie Badlander 100W (EL34) - community pack

If you like my work & want to support me, consider grabbing the ✨full✨ ReLoaded: Mesa Boogie Badlander 100W (EL34) NAM pack over here: 👉 https://ko-fi.com/2dornam/shop 🙏 This pack features the Mesa Boogie Badlander Rectifier 100W (EL34) captured using a ✅ real ✅ Mesa 4x12 Oversized Straight cabinet loading down the amplifier. Legendary Tones "Mr.Scary Mod" included 🔥 ℹ️ Summary Calibrated profiles (STANDARD & xSTD architectures) showcase the amp’s tone range. AMP, POW, and PRE profiles capture maximum flexibility and accuracy using a high-quality signal chain. AMP and POW profiles use a real Mesa 4x12 Oversized Straight cabinet for the most faithful experience. This full pack covers all 3 modes (Clean, Crunch, & Crush) and includes: • 70 x AMP profiles (1 x DI and 9 mic-ed up, full-rig flavors for every knob combination used) • 50 x PRE profiles • 42 x POW profiles (1 x DI and 9 mic-ed up, full-rig flavors for every knob combination used) • 20 x OD pedal profiles Total: 1,190 individual NAM files. All profiles are trained twice in STD and xSTD architectures, resulting in 2,380 individual NAM files with xSTD accounted for. ✅ Efficiency Streamlined for users across platforms (Dimehead, Valeton GP-5 etc), AMP & POW profiles offer 10 flavors: • DI: raw poweramp <-> cab signal tapped with a DI box, no microphone • SM57-CNT: full-rig chain, cab mic-ed with a Fredman 55” Shure SM57 on the speaker center • SM57-OAX: full-rig chain, cab mic-ed with a Fredman 55” Shure SM57 off axis • SM58: full-rig chain, cab mic-ed with a Shure SM58 • FREDMAN #1: full-rig chain using the Fredman 55” technique, no volume tweak • FREDMAN #2: full-rig chain using the Fredman 55” technique, off-axis 2dB boost • BLEND #1: full-rig chain, cab mic-ed with 2 mics (Shure SM57-CNT & SM58) • BLEND #2: full-rig chain, cab mic-ed with 2 mics (Shure SM57-OAX & SM58) • BLEND #3: full-rig chain blend (FREDMAN #1 & SM58) • BLEND #4: full-rig chain blend (FREDMAN #2 & SM58 ⚙️ Reamp chain details • RME Fireface UCX II -> Lehle P-SPLIT III -> Mesa Badlander 100W -> St.Rock React:IR II (Mesa 4x12 OS Straight load) -> RME Fireface UCX II • SEND level: 18.995 dBu • RETURN level: 13.195 dBu Use the new "Calibration" feature (video linked) in the NAM plugin to get the most out of these profiles: https://www.neuralampmodeler.com/post/neuralampmodelerplugin-v0-7-12-is-released 🏷️ Naming convention summary • [AMP] = full head (pre & poweramp) • [PRE] = preamp section; use a poweramp + IR or tube amp & cab • [POW] = poweramp only; use a preamp (and IR if using DI) • [OD] = overdrive pedal • 020W, 050W, 100W = poweramp power rating • BOLD = poweramp set to bold power • VARC = poweramp variac mode • CLEAN = amp used CLEAN channel • CRNCH = amp used CRUNCH channel • CRUSH = amp used CRUSH channel • STD = STANDARD architecture; works on Dimehead NAM Player • xSTD = custom architecture (by Андрей Полевой) from NAM FB • TSMINI = Tube Screamer Mini • MXRM77 = MXR Custom Badass Modified O.D. • FORTIN14 = Fortin Fourteen • DWHAMER = PedalPCB Dwarven Hammer • DFXKoD = DemonFX King of Drive • DFXKLON = DemonFX Centaur • DFXDBOOST = DemonFX Dual Boost, Exotic EP mode 📒 Spreadsheet with settings & inspiration for all profiles: https://mega.nz/file/TlRFTTqD#JJYozOEJRgY2v7PAt15oe8RE422LcSpoVmEZZV342A0