RT Highwind Direwolf

Captures of my Highwind Direwolf (which is like a modified tubescreamer), with settings meant for boosting a gained up amp. If the output is too strong, dial back the block's output level to simulate turning down the pedal's Level knob. With the Gain knob at 0, there isn't much difference between Asymmetrical and LED clipping, but I included both for the sake of completeness. Calibrated at 14 dBu All captures were taken with: - Gain knob at 0 - Tone around 2 o'clock - Mix on full - Level on full, or low enough not to clip my interface input - Boost toggle on "stock" position - 18V mode Stock = "Bite" and "Growl" both set to their "stock" positions Br = Bite Gr = Growl 1 = "low" setting of toggle 2 = "high" setting of toggle Asym = "Mode" toggle set to "Asymmetrical Clipping" LED = "Mode" toggle set to "LED Clipping" Cln = "Mode" toggle set to "Diode Lift (Clean)" If a capture is named "Br1 Asym", the Growl toggle is in the "stock" position. If a capture is named "Gr1 Asym", the Bite toggle is in the "stock" position. Signal chain: Avid Mbox Studio (line out) > Radial Reamp Station (reamp box) > Highwind Direwolf > Avid Mbox Studio (instrument input) If you want some grit for more use-cases, check out my other Direwolf capture pack! Let me know what you think!