Tech 21 VT BASS DI

- Phantom & Ground Connect, +10dB 1/4", -20dB XLR buttons are OFF for all settings. - Bite button is ON for all settings. - Level is at the same roughly 1-2 o'clock position for all settings as pictured. Each setting (except Custom) is dialed in according to the user manual Sample Settings here (with the exception of the Level knob being at 1-2 o'clock): https://www.tech21nyc.com/wp-content/uploads/2020/12/VT_DI_OM_v6.pdf The Custom setting is what I personally use and is dialed in as pictured (Bite and Speaker Sim are both ON). When testing my initial captures vs the real pedal the captures seemed way too quiet with the level knob at the positions given in the Sample Settings in the manual. So I set that knob higher for these captures. I can redo the captures if most people disagree. This is my first set of captures so I wouldn't be shocked to find out that I did something wrong. Any pointers on how to capture this pedal properly if I haven't done so are very welcome! Signal chain: Sweep files goes out of Logic Pro - Focusrite Scarlett 18i20 3rd Gen Output 5 To +4dB LINE Input of Radial Pro-RMP. Output of Radial Pro-RMP to Input of VT BASS DI. Out of VT BASS DI to Input 2 of Focusrite Scarlett 18i20 3rd Gen and recorded back into Logic Pro Focusrite Scarlett 18i20 3rd Gen Input and Output gains are both set to 0.