TONE3000

JHS Wanderer (Morning Glory + NOTAKLÖN 2026)

Pedal Capture

NAM

2
gturvey's avatar

gturvey

6h

Description

JHS Wanderer, the 2-in-1 Morning Glory (Bluesbreaker-style) and NOTAKLÖN (Klon-style) in one box. 38 NAM A2-Full models, 9 V, captured through a calibrated re-amp rig. A2-Full ESRs 0.0001–0.0021. WHAT'S HERE - WAN-01 to 24, singles. The NOTAKLÖN alone runs from clean boost (Gain MIN) to MAX, in original mode (+/- toggle down) and Shamrock mode (toggle up: +4 dB, more mids, hard clipping), and includes published settings (John Mayer, bluesy edge, hard rock). The Morning Glory alone covers a Drive ladder in normal and high-gain mode, plus tone sweeps. Both sides include the settings from JHS's own Wanderer videos. Bright Cut off throughout. - WAN-V1 to V14, stacks through the main jacks, in BOTH orders: JHS's two demo stacks (Edge, Dark), Josh's "build up to both red remotes" sequence, the stack from Josh's own pedalboard, and two boost-into-drive stacks. For the video-based stacks, each side's Volume was set to unity before stacking, so neither side hits the other harder than at bypass level. Knob positions read from the JHS videos are about ±30 minutes on the dial. NAME KEY Klon = NOTAKLÖN side, MG = Morning Glory side. Klon-MG / MG-Klon = signal order in a stack. ToggleDn / ToggleUp (KlonDn / KlonUp) = NOTAKLÖN +/- toggle (Up = Shamrock). GainOff / GainOn (MGOff / MGOn) = Morning Glory high-gain toggle. G / D / T / L = Gain / Drive / Tone or Treble / Level as clock positions (G1300 = 1:00). LPlus6 = set to +6 dB over bypass. JoshDemo1 / 2 / 3 = Josh's build-up: base, then MG high gain, then both red remotes. CALIBRATION AND LEVELS Input 12.3 dBu, output 22.5 dBu (both at 0 dBFS). Every file keeps the pedal's real output level; nothing was normalised. Most captures are not at unity, so add the trim below to hear each one at bypass level (unity = -27.2 LUFS on the capture sweep). At high Volume settings, the NOTAKLÖN's output stage tops out at about +18 dBu. That is real pedal behaviour and is in the captures. STACKING YOUR OWN The singles can be chained to rebuild stacks. Because of the 12.3 / 22.5 dBu calibration, add +10.2 dB between the two models. Tested: WAN-01 -> +10.2 dB -> WAN-04 matched the real stack (WAN-V1) at ESR 0.002, within 0.2 dB of its level. TRIM TO UNITY (dB) WAN-01 Klon boost, Gain 9:00: -5.7 WAN-02 Klon core OD, Gain 1:00: -4.8 WAN-03 MG edge, Drive 10:00: -2.7 WAN-04 MG core OD, Drive 2:00: -3.1 WAN-05 Klon Shamrock hot OD, Gain 1:00: -8.0 WAN-06 MG high gain, Drive 12:00: +8.1 WAN-07 Klon max gain: +1.9 WAN-08 Klon max gain, Shamrock: -2.4 WAN-09 Klon Shamrock low gain, Gain 10:00: +3.2 WAN-10 Klon bluesy edge, Gain 10:00: -5.5 WAN-11 Klon John Mayer settings: -2.0 WAN-12 Klon hard rock: -6.2 WAN-13 MG max Drive, high gain: -4.2 WAN-14 MG max Drive: -7.0 WAN-15 MG edge of breakup: -3.8 WAN-16 MG rock crunch, high gain: +7.0 WAN-17 MG JHS drive up: +6.4 WAN-18 MG JHS dark: +8.7 WAN-19 MG JHS bright: +5.1 WAN-20 Klon JHS clean, Gain MIN: -2.3 WAN-21 Klon JHS bright: +4.9 WAN-22 MG Josh's demo, high gain: +9.7 WAN-23 Klon Josh's demo: +12.8 WAN-24 Klon Josh's demo, Shamrock: +9.5 WAN-V1 Klon boost into MG core OD: -6.1 WAN-V2 Klon boost into MG high gain: +8.0 WAN-V3 JHS Edge stack, MG first: +0.1 WAN-V4 JHS Edge stack, Klon first: -3.2 WAN-V5 JHS Dark stack, MG first: -1.0 WAN-V6 JHS Dark stack, Klon first: -2.3 WAN-V7 Josh demo 1 base, MG first: +0.6 WAN-V8 Josh demo 2 MG high, MG first: -0.7 WAN-V9 Josh demo 3 both red, MG first: -3.4 WAN-V10 Josh demo 1 base, Klon first: -3.2 WAN-V11 Josh demo 2 MG high, Klon first: -5.2 WAN-V12 Josh demo 3 both red, Klon first: -5.5 WAN-V13 Josh's board crunch, MG first: +3.0 WAN-V14 Josh's board crunch, Klon first: -0.4

Makes and Models

JHS Wanderer

Preview

NAM CaptureTone on
Mayer - GuitarNone

NAM Models

Each model captures the gear at specific knob settings.

A2-FullESR: 0.0007

A2-LiteESR: 0.0027

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0007

A2-LiteESR: 0.0033

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0001

A2-LiteESR: 0.0004

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0001

A2-LiteESR: 0.0009

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0006

A2-LiteESR: 0.0023

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0001

A2-LiteESR: 0.0006

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0019

A2-LiteESR: 0.0078

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0021

A2-LiteESR: 0.0065

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0005

A2-LiteESR: 0.0019

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0008

A2-LiteESR: 0.0025

400 Epochs

Sweep

cal.

Captured on

Tone3000 - NAM Captures and IRs

2 Comments

Share your thoughts...
@username to mention • Ctrl+Enter to submit
fatsojetson's avatar
You king! There was no way I was going to be able to afford that pedal but I wanted to try it. Many thanks.
3
infinite thanks for the calibration!
2

License: T3K

Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.

Works with TONE3000

Browse and play TONE3000 tones directly in these plugins, pedals and amps.

Pedals and amps

TONE3000 Digital Models

NEW TO TONE3000?

Discover hyper-realistic digital models of iconic gear, including the Fender Twin Reverb, Vox AC30, Marshall JCM 800, and thousands more. Getting started is easy—and free!