TONE3000

Kitty Hawk Junior Series I (Celine2NAM)

Amp Head Capture

NAM

1
83ennui's avatar

83ennui

2h

Description

Kitty Hawk Junior Series I. Saw this amp being mentioned in one of the posts from the NAM Facebook group that used my Kitty Hawk Quattro captures for a cover of the intro section from Girl From Lebanon by Europe. (https://www.youtube.com/watch?v=6mLMAvS26YI) I was going to draw the schematics in LiveSPICE as usual until someone brought up to me this new realtime SPICE-based circuit simulator named "Céline". I was elated to find out that there's native Linux support, calculations during simulation are much more stable, and the overall software feels more smooth to work with - even rendering times with 4x oversampling is faster! There are plans to redraw most of my existing LiveSPICE schematics into Céline. Though, it will take a long while, given how many amps I've covered... ・Normal and Overdrive inputs w/ Mid Cut, Fat, Ultra Hi, and Bright switches.  。The Overdrive input uses the Overdrive and Volume controls in series, so three batch of captures of it with both pots at noon (5 o'clock), and each of them dimed at 10. ・Preamp and poweramp sections are also provided separately. [LEGEND] ・FULL - Preamp + poweramp ・PRE - Preamp section ・PWR - Poweramp section ・NOR - Normal input ・OD - Overdrive input / knob position ・V - Volume knob position ・MC - Mid Cut ・FAT - Fat ・UH - Ultra Hi ・BR - Bright [NOTES] ・All the models are captured with 4x oversampling for the highest quality possible. ・All the controls are flat so you can hear the amp as it is with neutral settings. I may add additional captures with "ideal" settings, but that's not a priority for now..  。Only exception to this is the Overdrive input. Three batch of captures of it with both controls at noon (5 o'clock) and each of them dimed at 10 are provided to cover the range of gain available. ・Should you wish to push more gain into the captures, use a separate gain utility/plugin and a clipper/waveshaper/limiter with a ceiling of -0.1dB or less before your NAM loader to prevent nuking the models if the input signal gets too hot. === Céline: https://livespice.org/ Céline .celsch schematic files: https://github.com/MARKTHERENCE/Celine-emy-Circuits === There has been some interest for me to have an option for people who'd like to donate for my work, so here's my PayPal link *only* if you feel generous: https://paypal.me/83ennui Making these captures take a lot of time, from researching the schematic diagrams (whether original or reproduced with certain degrees of verification), to cross-referencing from various gear presentations and demos, and several passes of training the captures to determine the adjustments needed with the Celine models/components for the most accurate/ideal simulation possible.

Preview

Model
IR
Input

Powered by

Models

Each model captures the gear at specific knob settings.

A2-FullESR: 0.0002

A2-LiteESR: 0.001

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0003

A2-LiteESR: 0.0017

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0003

A2-LiteESR: 0.0014

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0002

A2-LiteESR: 0.0012

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0002

A2-LiteESR: 0.0012

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0003

A2-LiteESR: 0.0015

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0002

A2-LiteESR: 0.0015

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0003

A2-LiteESR: 0.0015

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0002

A2-LiteESR: 0.0013

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0003

A2-LiteESR: 0.0013

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

1 Comment

Share your thoughts...
@username to mention • Ctrl+Enter to submit
83ennui's avatar
83ennuiCreator
Was set to private for a bit to recapture the poweramp section at proper levels. Should be good to go now.
1

License: T3K

Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.

Works with TONE3000

Browse and play TONE3000 tones directly in these plugins, pedals and amps.

Pedals and amps

TONE3000 Digital Models

NEW TO TONE3000?

Discover hyper-realistic digital models of iconic gear, including the Fender Twin Reverb, Vox AC30, Marshall JCM 800, and thousands more. Getting started is easy—and free!