TONE3000

Laney Ironheart IRT120 CH2 Rhythm boosted

Amp + Cab Capture

NAM

edgiljr5's avatar

edgiljr5

1h

Description

LANEY IRONHEART IRT120H - CHANNEL 2 (RHYTHM), PRE-BOOST ON =================================================== WHAT IT IS ---------- A Neural Amp Modeler capture of the Laney IronHeart IRT120H channel 2 in its Rhythm voicing, with the pre-boost all the way up - a tight, dense, chunky high-gain rhythm tone. It is a capture of a circuit model, not a mic'd amp. The whole CH2 preamp was rebuilt in LTspice from the factory service schematic - the pre-boost op-amp, all five 12AX7 stages, the Marshall-style tone stack and the output buffer - and NAM was trained on the TONE3000 standard sweep run through it. MODELS ------ * Head only (no cab): no cab, no power amp. Load your own 4x12 / V30 IR after it. * Head + cab (cab baked in, plug-in-and-go), same amp and settings: - ML Sound Lab "Color Calibrated" (free IR) - Will Putney album IR "Thousand Mile Stare" - V30 4x12 SM57 (close-mic'd) HOW IT WAS BUILT ---------------- - Every preamp stage transcribed from the schematic: same parts, same supply voltages. - DC bias of all five tube stages checked against the voltages printed on the schematic (within a few percent). - Each stage's output was rendered and auditioned on its own to check the gain structure. - Voiced against a real IRT120 capture through the same DI and the same cab IR: within about 1-3 dB per band (low bass under ~90 Hz a little light), with matching crest and saturation. SETTINGS CAPTURED (panel numbers 0-10) --------------------------------------- CH2 Rhythm voicing (pull switches in) - PRE-BOOST maxed - GAIN 7.5 - BASS 6.5 - MID 5.5 - TREBLE 6.5 - VOLUME 5 Not in the capture: reverb, effects loop, the Lead-voicing pull switches, and the power amp. RECOMMENDED USE --------------- - Run it raw (loudness normalize OFF) and feed a normally tracked DI at its natural level. It tracks pick dynamics and your guitar's volume knob. - The pre-boost is already on; a light boost in front still stacks. - Too bright? A gentle high-shelf cut around 3 kHz, or a darker IR. ALSO PLAYED BY -------------- IronHeart amps are used by players including Ed Garcia (Vitalism), Killswitch Engage, Mattias IA Eklundh (Freak Kitchen) and Keith Merrow. This is not a model of anyone's settings, and none of them are affiliated with this pack. CREDITS ------- - Circuit source: Laney IRT120H factory service schematic. This is an independent, unofficial model, not affiliated with or endorsed by Laney. - Real-amp reference (used only to check the model): Beji's Laney IronHeart IRT120 NAM pack. - Cab IRs: ML Sound Lab (free 2025 IR pack); Will Putney album IR pack; ATB ToneX pack. Respect each IR's own license. - Circuit modeling, voicing, cab choice, NAM training: edgiljr5 ===================================================

Preview

Model
IR
Input

Powered by

Models

Each model captures the gear at specific knob settings.

A2-FullESR: 0.0006

A2-LiteESR: 0.0068

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0005

A2-LiteESR: 0.0104

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0005

A2-LiteESR: 0.003

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0006

A2-LiteESR: 0.0045

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

Comments

Share your thoughts...
@username to mention • Ctrl+Enter to submit

License: T3K

Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.

Works with TONE3000

Browse and play TONE3000 tones directly in these plugins, pedals and amps.

Pedals and amps

TONE3000 Digital Models

NEW TO TONE3000?

Discover hyper-realistic digital models of iconic gear, including the Fender Twin Reverb, Vox AC30, Marshall JCM 800, and thousands more. Getting started is easy—and free!