Marshall JCM600 (LiveSPICE2NAM)

Marshall JCM600. ・Normal channel - typical low gain Marshall sound. Can get into crunch territory when pushed. ・Overdrive channel - uses clipping diodes for distortion between the preamp tube stages. ・Preamp and poweramp sections are also provided separately. [NOTES] ・All the models are captured with 8x oversampling and 64 iterations for the highest quality possible. ・All controls are flat so you can hear the amp as it is with neutral settings. I may add additional captures with "ideal" settings, but that's not a priority for now.. ・Should you wish to push more gain into the captures, use a separate gain utility/plugin, then add soft clipping with the threshold/ceiling at 0dB and a 20Hz high pass filter before your NAM loader to prevent nuking the models if the input signal gets too hot. === First ever NAM captures with Architecture 2. About time I hopped on the bandwagon. A2 has been a significant improvement from its predecessor. I enjoyed the results so much that I decided to make NAM captures of some of my own LiveSPICE schematic files, primarily for convenience and CPU usage - especially with my music "workstation" being an early 2011 13" MacBook Pro as a Linux machine. More to come... === LiveSPICE: https://livespice.org/ Original LiveSPICE .schx schematic file: https://github.com/MARKTHERENCE/LiveSPICE-MK-Circuits