TONE3000

MESA/Boogie Lone Star & Lone Star Special (LiveSPICE2NAM)

Amp Head Capture

NAM

83ennui's avatar

83ennui

1 hour ago

Description

MESA/Boogie Lone Star and Lone Star Special. Now _this_ is what came up first when I was looking up stuff about Andy Timmons. Shoutouts to ブギウギ (bugiwugi). ・Channel 1 is quite clean, but can be overdriven into borderline crunch. ・Channel 2 expands upon Channel 1 with a Drive switch for an adjustable tube preamp stage. Two captures are provided - one with the Drive control set to 5 (noon), and the other dimed to 10/max for the highest gain available. It also has 3 different voicings: Normal, Thick, and Thicker. ・Three power amp watt settings:  。The Lone Star can switch between 100w, 50w, and 10w.  。The Lone Star Special can switch between 30w, 15w, and 5w. ・Preamp and poweramp sections are also provided separately. [LEGEND] ・FULL - Preamp + poweramp ・PRE - Preamp section ・PWR - Poweramp section ・CH1 - Channel 1 ・CH2[NOR/THCK1/THCK2] - Channel 2 [Normal/Thick/Thicker] ・DR-5/10 - Channel 2 Drive (set at 5 and 10, respectively) [NOTES] ・All the models are captured with 8x oversampling and 64 iterations for the highest quality possible. ・All the controls are flat so you can hear the amp as it is with neutral settings. I may add additional captures with "ideal" settings, but that's not a priority for now..  。Only exception to this is Channel 2. Two captures of it with the Drive control at 5 (noon) and dimed at 10/max are provided to cover the range of gain available. ・Should you wish to push more gain into the captures, use a separate gain utility/plugin and a clipper/waveshaper/limiter with a ceiling of -0.1dB or less before your NAM loader to prevent nuking the models if the input signal gets too hot. === LiveSPICE: https://livespice.org/ Original LiveSPICE .schx schematic file: https://github.com/MARKTHERENCE/LiveSPICE-MK-Circuits

Preview

Models

Each model captures the gear at specific knob settings.

A2-FullESR: 0.0001

A2-LiteESR: 0.0006

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0001

A2-LiteESR: 0.0005

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0002

A2-LiteESR: 0.0007

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0002

A2-LiteESR: 0.0008

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0012

A2-LiteESR: 0.0029

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.004

A2-LiteESR: 0.0098

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0016

A2-LiteESR: 0.0033

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0041

A2-LiteESR: 0.0084

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0017

A2-LiteESR: 0.0034

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

A2-FullESR: 0.0039

A2-LiteESR: 0.0086

400 Epochs

Sweep

Captured on

Tone3000 - NAM Captures and IRs

2 Comments

Share your thoughts...
@username to mention • Ctrl+Enter to submit
0's avatar
How long does it take you to make all these captures?
0

License: T3K

Users may download and use the data file in software and publish the resulting outputs without royalties or restrictions. However, they may not upload, republish, or distribute the data file without the author's permission.

Use Your Tones

Load NAM files and IR's from TONE3000 onto a free plugin or compatible pedal.

Plugins

TONE3000 Digital Models

NEW TO TONE3000?

Discover hyper-realistic digital models of iconic gear, including the Fender Twin Reverb, Vox AC30, Marshall JCM 800, and thousands more. Getting started is easy—and free!