MESA/Boogie Mark I (LiveSPICE2NAM)

MESA/Boogie Mark I. ・Input 1 is the main/distortion channel and has two Volume controls. Two captures are provided for this channel - one with the Volume 1 control set to 5 (noon), and the other dimed to 10/max for the highest gain available. Meanwhile, Input 2 engages the clean channel by skipping the first tube stage of the preamp section. Both also have a bright switch. ・The 5-band EQ circuit has some saturation introduced by the transistors. It is not baked in with the pre+power NAM captures for a more transparent representation of the overall amp, but I included said circuit on its own with the EQs set to flat. ・Preamp and poweramp sections are also provided separately. [LEGEND] ・FULL - Preamp + poweramp ・PRE - Preamp section ・PWR - Poweramp section ・IN1 - Input 1 ・IN2 - Input 2 ・BR - Bright ・Si - Silicon transistors [NOTES] ・All the models are captured with 8x oversampling and 64 iterations for the highest quality possible. ・All controls are flat so you can hear the amp as it is with neutral settings. I may add additional captures with "ideal" settings, but that's not a priority for now.. 　。Only exception to this is Input 2. Two captures of it with the Volume 1 control at 5 (noon) and dimed at 10/max are provided to cover the range of gain available. ・Should you wish to push more gain into the captures, use a separate gain utility/plugin and a clipper/waveshaper/limiter with a ceiling of -0.1dB or less before your NAM loader to prevent nuking the models if the input signal gets too hot. === LiveSPICE: https://livespice.org/ Original LiveSPICE .schx schematic file: https://github.com/MARKTHERENCE/LiveSPICE-MK-Circuits