MESA/Boogie Nomad 100 (LiveSPICE2NAM)

MESA/Boogie Nomad 100 ・Channel 1 - Normal and Pushed ・Channel 2 - Vintage and Modern ・Channel 3 - Modern and Vintage ・The 5-band EQ circuit has some saturation introduced by the transistors. It is not baked in with the pre+power NAM captures for a more transparent representation of the overall amp, but I included said circuit on its own with the EQs set to flat. ・6L6 and EL34 variants are included due to the Bias switching circuit from the poweramp section. ・Preamp and poweramp sections are also provided separately. [LEGEND] ・FULL - Preamp + poweramp ・PRE - Preamp section ・PWR - Poweramp section ・CH1 - Channel 1 ・CH2 - Channel 2 ・CH3 - Channel 3 ・NOR - Normal ・PSH - Pushed ・VNTG - Vintage ・MDRN - Modern ・Si - Silicon transistors [NOTES] ・All the models are captured with 8x oversampling and 64 iterations for the highest quality possible. ・All controls are flat so you can hear the amp as it is with neutral settings. I may add additional captures with "ideal" settings, but that's not a priority for now.. ・Should you wish to push more gain into the captures, use a separate gain utility/plugin and a clipper/waveshaper/limiter with a ceiling of -0.1dB or less before your NAM loader to prevent nuking the models if the input signal gets too hot. === First ever NAM captures with Architecture 2. About time I hopped on the bandwagon. A2 has been a significant improvement from its predecessor. I enjoyed the results so much that I decided to make NAM captures of some of my own LiveSPICE schematic files, primarily for convenience and CPU usage - especially with my music "workstation" being an early 2011 13" MacBook Pro as a Linux machine. More to come... === LiveSPICE: https://livespice.org/ Original LiveSPICE .schx schematic file: https://github.com/MARKTHERENCE/LiveSPICE-MK-Circuits