Sovtek MIG Series (LiveSPICE2NAM)

Sovtek MIG-50, MIG-60, MIG-100, and MIG-500 "Bassov Blues Midget". The MIG-50 was requested by KolinwithaK (@kolin.mp3) from Instagram because he found my account there by chance and recognized the name. Ended up doing the whole line of MIG amps because they were in my interests anyways, I just forgot so it was a good reminder lol. ・Sovtek MIG-50 and MIG-500 are based on the Bassman. The MIG-50 has normal (Input 1) and treble (Input 2) inputs, while the MIG-500 has only one input and less gain because it's designed specifically for bass. ・Sovtek MIG-60 and MIG-100 are based on the JCM800. The major differences between the two are that the MIG-60 has a compressed high gain sound, while the MIG-100 is much more open. Both have High and Low inputs. ・Preamp and poweramp sections are also provided separately. [LEGEND] ・FULL - Preamp + poweramp ・PRE - Preamp section ・PWR - Poweramp section ・HI - High input (MIG-60 & MIG-100) ・LO - Low input (MIG-60 & MIG-100) ・IN1 - Input 1 / /Normal input (MIG-50 & MIG-500) ・IN2 - Input 2 / Treble input (MIG-50 & MIG-500) [NOTES] ・All the models are captured with 8x oversampling and 64 iterations for the highest quality possible. ・All controls are flat so you can hear the amp as it is with neutral settings. I may add additional captures with "ideal" settings, but that's not a priority for now.. ・Should you wish to push more gain into the captures, use a separate gain utility/plugin and a clipper/waveshaper/limiter with a ceiling of -0.1dB or less before your NAM loader to prevent nuking the models if the input signal gets too hot. === LiveSPICE: https://livespice.org/ Original LiveSPICE .schx schematic file: https://github.com/MARKTHERENCE/LiveSPICE-MK-Circuits === There has been some interest for me to have an option for people who'd like to donate for my work, so here's my PayPal link *only* if you feel generous: https://paypal.me/83ennui Making these captures take a lot of time, from researching the schematic diagrams (whether original or reproduced with certain degrees of verification), to cross-referencing from various gear presentations and demos, and several passes of training the captures to determine the adjustments needed with the LiveSPICE models/components for the most accurate/ideal simulation possible.