Tech 21 Marty Friedman SansAmp Guitar Pedal

Description

Tech 21 Marty Friedman SansAmp Guitar Pedal Says Marty, “This is it! This pedal has been in the works for a long time and only an exceptional design engineer like Andrew Barta could make something with these beautiful tones so incredibly simple to use. Such bonehead easy-to-use effects haven’t been known to have world class sounds in them until now. I’m proud to put my name on the first one.” An iconic guitarist who eloquently serves up enchanting and tearful melodies, as well as complicated notes that make your head spin, Marty Friedman surprisingly likes to keep his arsenal quite simple. The goal for Tech 21 was to embody his tone in a neat, compact, plug-and-play footprint. Marty’s focus is always on the music taking the spotlight rather than complex gear with distracting bells and whistles or requiring a cumbersome learning curve. The Marty Friedman programmable Signature SansAmp comes preset with his main clean, dirty and lead tones. Operationally similar to the SansAmp PSA 2.0, there are two modes: Performance mode to have your 3 main presets at the ready and Studio mode for up to 128 locations for custom presets. Storing and recalling programs is simple. You don’t need any special training or a degree in physics to operate your unit. The rotation of each control increases and decreases in a smooth, gradual, linear fashion, so when you turn a knob, you hear the difference immediately –in real time. You just set your tones and push the Save button. Yeah, it’s that easy. In the studio, you can record direct, enhance existing tracks in mixdowns, as well as add interesting touches to any instrument. Live, the Marty Friedman Signature SansAmp can be used as a pre-amp direct into a power amp with speaker cabinets, as a “monster direct box” to a P.A. system (or both simultaneously), and as an outboard processor. Controls include Reverb, 3-band active EQ, Drive and Level. There’s also an adjustable Gate that dynamically and smoothly cleans up the signal, rather than cutting it off abruptly. Filter alters the tonality by manipulating the mid-range and is specifically voiced for Marty’s unique sound. As is the case with all of our signature artist gear, the Marty Friedman Signature SansAmp offers Marty’s core sounds and the versatility for many different styles. Maximum tone, minimum effort Right out of the box, the Marty Friedman SansAmp contains three of the guitarist’s go-to presets available in Performance mode — clean, crunch, and lead — ready to melt faces the moment you power on. Flip over to Studio mode, and the pedal opens you up to 128 recallable presets that can be customized to your exact preferences. Dialing in your favorite tones is simple with the straightforward Bass, Middle, Treble, and Drive controls that are responsive to the slightest touch — then, use the Filter control to fine-tune the midrange sweep. The Gate control smoothly cleans up your signal and rolls off noise instead of cutting out abruptly. Once you have your three favorite sounds, assign them to the three footswitches, switch back to Performance mode, and you’re ready to put on an awe-inspiring performance. Need to tune up? The Marty Friedman SansAmp has you covered with a built-in tuner. The Marty Friedman programmable Signature SansAmp comes preset with his main clean, dirty and lead tones. Operationally similar to the SansAmp PSA 2.0, there are two modes: Performance mode to have your 3 main presets at the ready and Studio mode for up to 128 locations for custom presets. Storing and recalling programs is simple. You don't need any special training or a degree in physics to operate your unit. The rotation of each control increases and decreases in a smooth, gradual, linear fashion, so when you turn a knob, you hear the difference immediately - in real time. You just set your tones and push the Save button. Yeah, it's that easy. In the studio, you can record direct, enhance existing tracks in mixdowns, as well as add interesting touches to any instrument. Live, the Marty Friedman Signature SansAmp can be used as a pre-amp direct into a power amp with speaker cabinets, as a "monster direct box" to a P.A. system (or both simultaneously), and as an outboard processor. Controls include Reverb, 3-band active EQ, Drive and Level. There's also an adjustable Gate that dynamically and smoothly cleans up the signal, rather than cutting it off abruptly. Filter alters the tonality by manipulating the mid-range and is specifically voiced for Marty's unique sound. As is the case with all of our signature artist gear, the Marty Friedman Signature SansAmp offers Marty's core sounds and the versatility for many different styles. DRIVE For gain and overdrive LOW, MID, HIGH Active tone controls that cut or boost from 12 o'clock, +/-12dB REVERB For the spatial ambiance of a well-balanced recording room GATE Dynamically & smoothly cleans up your signal, rather than abruptly cutting if off FILTER Alters the tonality by manipulating the mid-range and is specifically voiced for Marty's unique sound Studio Mode For storing up to 128 presets Performance Mode Instantly access your 3 most often used presets BUILT-IN SPEAKER/CAB SIM The SansAmp Tube Amplifier Emulation technology encompasses the entire signal chain, from pre-amp to power amp to speaker simulation. An integral part of the circuitry, the SansAmp speaker simulation will complement any type of guitar speaker cabinet system. Features • Chromatic tuner • Effect loop • MIDI interface • 1/4-inch 1meg Ohm input • Low impedance XLR output with Ground Lift to go direct to a PA desk or studio board • 1/4-inch low impedance output with Level Selector switch • Rugged, all-metal housing, knobs and jacks • Silent-switching, custom metal footswitch actuators • Measures: 7.5"l x 5.25"w x 2.0"h • Weight: 24 oz. CONTROLS & FEATURES • DRIVE for gain and overdrive • LOW, MID, HIGH are active tone controls that cut or boost from 12 o’clock, +/-12dB • REVERB for the spatial ambiance of a well-balanced recording room • GATE dynamically & smoothly cleans up your signal, rather than abruptly cutting it off • FILTER alters the tonality by manipulating the mid-range and is specifically voiced for Marty’s unique sound • Studio Mode for storing up to 128 presets • Performance Mode to instantly access your 3 most often used presets • BUILT-IN SPEAKER/CAB SIM: The SansAmp Tube Amplifier Emulation technology encompasses the entire signal chain, from pre-amp to power amp to speaker simulation. An integral part of the circuitry, the SansAmp speaker simulation will complement any type of guitar speaker cabinet system. OTHER FEATURES • Chromatic tuner • Effect loop • MIDI interface • 1/4-inch 1megOhm input • Low impedance XLR output with Ground Lift to go direct to a PA desk or studio board • 1/4-inch low impedance output with Level Selector switch • Rugged, all-metal housing, knobs and jacks • Silent-switching, custom metal footswitch actuators • Measures: 7.5”l x 5.25”w x 2.0”h • Weight: 24 oz. • Utilizes included 9V DC Universal Power Supply: Model #DC9. “Auto-switching,” self-adjusting 100V240V, 200mA. Includes interchangeable international prong assemblies for EU, UK, Australia/New Zealand for use anywhere in the world. • Optional MID Cable Set available on our Accessories Page HERE Back Plate Illustration UNDER THE HOOD: CRACKING THE CODE As a staunch proponent of analog, Andrew Barta has never had the desire to venture into digital designs. The inventor of the SansAmp tube amplifier emulation technology, which debuted in 1989, Barta has remained loyal to the analog domain. That is, until now. According to Barta, “To me, the main drawback of a digital modeler is the feel and the sound quality. It lacks dynamics and responsiveness. It sounds one-dimensional and it isn’t touch-sensitive, so the nuances of your playing style get lost. It limits your ability to change the tone by using your volume knob, picking lighter or harder. No matter how hard you hit the strings, the result is mostly the same. There’s no headroom and it doesn’t breathe. You are forced go to a different patch for a different tone. Ultimately, you have to conform to the device and play in a different way. So your artistic expression suffers. Artists have told me it’s like being in a cage. You have to wrestle harder to squeeze out the results and their fingers get really tired. After many years, Barta “cracked the code.” This happened to coincide with the opportunity to collaborate with Marty Friedman. The result is the Marty Friedman Signature SansAmp.

Makes and Models

Tags