Keeley Noble Screamer Overdrive

Keeley Noble Screamer — Full Analog Pedal Pack v2 (Direct Line Capture) This updated pack features 12 ultra-precise, direct line-level captures of the acclaimed Keeley Noble Screamer pedal, recaptured with an active Class-A reamping chain. Designed as a versatile standalone drive suite, it is also the perfect companion to my Marshall packs (6100 Anniversary & JTM Studio 20). Thanks to its unique hybrid design, this pedal offers 4 distinct voicing combinations by blending the Drive and Tone circuits of the legendary TS (Tube Screamer) and OD (ODR-style) architectures. 🎛️ Pack Breakdown (12 Profiles) - Signature Boosts (3 Profiles): The exact boost settings dialed to tighten and drive Marshall preamps. - Pure TS & Pure OD (6 Profiles): The full spectrum of pure circuits, ranging from transparent Clean Boosts to thick, saturated crunch. - Hybrid Magic (3 Profiles): Unique crossover pairings (OD Drive / TS Tone & TS Drive / OD Tone) designed to shape grain, low-end tightness, and pick attack like no traditional overdrive can. ⚠️ CRITICAL: Use "RAW" Mode or "CALIBRATED" Mode on the Pedal Instance. All profiles were captured with a fixed interface input gain across the entire session to preserve the pedal's authentic output level swings relative to your dry DI signal. 1. Enable "RAW" mode or "CALIBRATED" (or disable output normalization) ONLY in the NAM instance hosting the pedal profile. Leave your amplifier NAM instance in standard normalized mode. This ensures high-level pedal presets (such as Clean Boosts with Level maxed out) naturally slam your virtual amp model harder, perfectly replicating the physical pedal's behavior. 2. Calibration Note - Enable Input/Output Calibration in NAM / Gateway and set your interface's parameters accordingly. These profiles were captured with a mathematically verified reference level of +7.5 dBu (Input Send) and +16.0 dBu (Output Return). 💡 Signal Chain & Technical Specs Captured using a precision-calibrated, studio-grade reamping loop: * Audio Interface: MOTU M4 (ESS Sabre32 Ultra DAC line out 3 @ +16 dBu) * Reamping Unit: Radial X-Amp (Active Class-A buffer & transformer isolation, −8.5 dB measured insertion loss) * Return Capture: MOTU M4 Front Combo Input 1 (Line/Hi-Z @ 0 dB minimum gain, +16 dBu max) * Send Calibration: +7.5 dBu * Return Calibration: +16.0 dBu (Note: These are direct pedal captures meant to be loaded BEFORE an amp profile or a physical amplifier setup).